Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Survivin prevents the polycomb repressor complex 2 from methylating histone 3 lysine 27

Jensen, Maja; Chandrasekaran, Venkataragavan; García-Bonete, María-José; Li, Shuxiang; Anindya, Atsarina Larasati; Andersson, Karin; Erlandsson, Malin C.; Oparina, Nina Y.; Burmann, Björn M.; Brath, Ulrika; Panchenko, Anna R.; Bokarewa I., Maria; Katona, Gergely
iScience.
Jul 2023

AAV-mediated expression of a new conformational anti-aggregated α-synuclein antibody prolongs survival in a genetic model of α-synucleinopathies

Düchs, Matthias; Blazevic, Dragica; Rechtsteiner, Philipp; Kenny, Cynthia; Lamla, Thorsten; Low, Sarah; Savistchenko, Jimmy; Neumann, Manuela; Melki, Ronald; Schönberger, Tanja; Stierstorfer, Birgit; Wyatt, David; Igney, Frederik; Ciossek, Thomas
npj Parkinsons Dis..
Jun 2023
Abstract Prion-like transmission of pathology in α-synucleinopathies like Parkinson’s disease or multiple system atrophy is increasingly recognized as one potential mechanism to address disease progression. Active and passive immunotherapies targeting insoluble, aggregated α-synuclein are already being actively explored in the clinic with mixed outcomes so far. Here, we report the identification of 306C7B3, a highly selective, aggregate-specific α-synuclein antibody with picomolar affinity devoid of binding to the monomeric, physiologic protein. 306C7B3 binding is Ser129-phosphorylation independent and shows high affinity to several different aggregated α-synuclein polymorphs, increasing the likelihood that it can also bind to the pathological seeds assumed to drive disease progression in patients. In support of this, highly selective binding to pathological aggregates in postmortem brains of MSA patients was demonstrated, with no staining in samples from other human neurodegenerative diseases. To achieve CNS exposure of 306C7B3, an adeno-associated virus (AAV) based approach driving expression of the secreted antibody within the brain of (Thy-1)-[A30P]-hα-synuclein mice was used. Widespread central transduction after intrastriatal inoculation was ensured by using the AAV2HBKO serotype, with transduction being spread to areas far away from the inoculation site. Treatment of (Thy-1)-[A30P]-hα-synuclein mice at the age of 12 months demonstrated significantly increased survival, with 306C7B3 concentration reaching 3.9 nM in the cerebrospinal fluid. These results suggest that AAV-mediated expression of 306C7B3, targeting extracellular, presumably disease-propagating aggregates of α-synuclein, has great potential as a disease-modifying therapy for α-synucleinopathies as it ensures CNS exposure of the antibody, thereby mitigating the selective permeability of the blood-brain barrier.

Machine learning-driven multifunctional peptide engineering for sustained ocular drug delivery

Hsueh, Henry T.; Chou, Renee Ti; Rai, Usha; Liyanage, Wathsala; Kim, Yoo Chun; Appell, Matthew B.; Pejavar, Jahnavi; Leo, Kirby T.; Davison, Charlotte; Kolodziejski, Patricia; Mozzer, Ann; Kwon, HyeYoung; Sista, Maanasa; Anders, Nicole M.; Hemingway, Avelina; Rompicharla, Sri Vishnu Kiran; Edwards, Malia; Pitha, Ian; Hanes, Justin; Cummings, Michael P.; Ensign, Laura M.
Nat Commun.
May 2023
Abstract Sustained drug delivery strategies have many potential benefits for treating a range of diseases, particularly chronic diseases that require treatment for years. For many chronic ocular diseases, patient adherence to eye drop dosing regimens and the need for frequent intraocular injections are significant barriers to effective disease management. Here, we utilize peptide engineering to impart melanin binding properties to peptide-drug conjugates to act as a sustained-release depot in the eye. We develop a super learning-based methodology to engineer multifunctional peptides that efficiently enter cells, bind to melanin, and have low cytotoxicity. When the lead multifunctional peptide (HR97) is conjugated to brimonidine, an intraocular pressure lowering drug that is prescribed for three times per day topical dosing, intraocular pressure reduction is observed for up to 18 days after a single intracameral injection in rabbits. Further, the cumulative intraocular pressure lowering effect increases ~17-fold compared to free brimonidine injection. Engineered multifunctional peptide-drug conjugates are a promising approach for providing sustained therapeutic delivery in the eye and beyond.

Antigen discovery by bioinformatics analysis and peptide microarray for the diagnosis of cystic echinococcosis

Batisti Biffignandi, Gherard; Vola, Ambra; Sassera, Davide; Najafi-Fard, Saeid; Gomez Morales, Maria Angeles; Brunetti, Enrico; Teggi, Antonella; Goletti, Delia; Petrone, Linda; Tamarozzi, Francesca
PLoS Negl Trop Dis.
Apr 2023
Background Cystic echinococcosis (CE), caused by Echinococcus granulosus sensu lato, is a neglected zoonosis. Its diagnosis relies on imaging, supported by serology, while only imaging is useful for staging and follow-up. Since diagnostic tools and expertise are not widely available, new accurate and easily implementable assays for the diagnosis and follow-up of CE are highly needed. Methodology/Principal Findings We aimed to identify new E . granulosus antigens through a bioinformatics selection applied to the parasite genome, followed by peptide microarray screening and validation in ELISA, using independent panels of sera from patients with hepatic CE and clinically relevant controls. From 950 proteins selected in silico , 2,379 peptides were evaluated by microarray for IgG reactivity and eight candidates selected for validation. Reactivity to one peptide was significantly higher in the CE group (p = 0.044), but had suboptimal diagnostic accuracy. Conclusions/Significance Here we performed bioinformatics analysis and peptide microarray for antigen discovery, useful for the diagnosis of CE. Eight candidates were selected and validated. Reactivity to one peptide associated to CE but had suboptimal diagnostic accuracy. Importantly, the database developed in this study may be used to identify other antigenic candidates for CE diagnosis and follow-up.

Funneling modulatory peptide design with generative models: Discovery and characterization of disruptors of calcineurin protein-protein interactions

Tubiana, Jérôme; Adriana-Lifshits, Lucia; Nissan, Michael; Gabay, Matan; Sher, Inbal; Sova, Marina; Wolfson, Haim J.; Gal, Maayan
PLoS Comput Biol.
Feb 2023
Design of peptide binders is an attractive strategy for targeting “undruggable” protein-protein interfaces. Current design protocols rely on the extraction of an initial sequence from one known protein interactor of the target protein, followed by in-silico or in-vitro mutagenesis-based optimization of its binding affinity. Wet lab protocols can explore only a minor portion of the vast sequence space and cannot efficiently screen for other desirable properties such as high specificity and low toxicity, while in-silico design requires intensive computational resources and often relies on simplified binding models. Yet, for a multivalent protein target, dozens to hundreds of natural protein partners already exist in the cellular environment. Here, we describe a peptide design protocol that harnesses this diversity via a machine learning generative model. After identifying putative natural binding fragments by literature and homology search, a compositional Restricted Boltzmann Machine is trained and sampled to yield hundreds of diverse candidate peptides. The latter are further filtered via flexible molecular docking and an in-vitro microchip-based binding assay. We validate and test our protocol on calcineurin, a calcium-dependent protein phosphatase involved in various cellular pathways in health and disease. In a single screening round, we identified multiple 16-length peptides with up to six mutations from their closest natural sequence that successfully interfere with the binding of calcineurin to its substrates. In summary, integrating protein interaction and sequence databases, generative modeling, molecular docking and interaction assays enables the discovery of novel protein-protein interaction modulators.

Binding epitope for recognition of human TRPM4 channel by monoclonal antibody M4M

Wei, Shunhui; Behn, Julian; Poore, Charlene Priscilla; Low, See Wee; Nilius, Bernd; Fan, Hao; Liao, Ping
Sci Rep.
Nov 2022
Abstract Mouse monoclonal antibody M4M was recently designed to block human TRPM4 channel. The polypeptide for generating M4M is composed of peptide A1 between the transmembrane segment 5 (S5) and the pore, and a second peptide A2 between the pore and the transmembrane segment 6 (S6). Using peptide microarray, a 4-amino acid sequence EPGF within the A2 was identified to be the binding epitope for M4M. Substitution of EPGF with other amino acids greatly reduced binding affinity. Structural analysis of human TRPM4 structure indicates that EPGF is located externally to the channel pore. A1 is close to the EPGF binding epitope in space, albeit separated by a 37-amino acid peptide. Electrophysiological study reveals that M4M could block human TRPM4, but with no effect on rodent TRPM4 which shares a different amino acid sequence ERGS for the binding motif. Our results demonstrate that M4M is a specific inhibitor for human TRPM4.

A heterotypic assembly mechanism regulates CHIP E3 ligase activity

Das, Aniruddha; Thapa, Pankaj; Santiago, Ulises; Shanmugam, Nilesh; Banasiak, Katarzyna; Dąbrowska, Katarzyna; Nolte, Hendrik; Szulc, Natalia A; Gathungu, Rose M; Cysewski, Dominik; Krüger, Marcus; Dadlez, Michał; Nowotny, Marcin; Camacho, Carlos J; Hoppe, Thorsten; Pokrzywa, Wojciech
The EMBO Journal.
Aug 2022
CHIP (C‐terminus of Hsc70‐interacting protein) and its worm ortholog CHN‐1 are E3 ubiquitin ligases that link the chaperone system with the ubiquitin‐proteasome system (UPS). CHN‐1 can cooperate with UFD‐2, another E3 ligase, to accelerate ubiquitin chain formation; however, the basis for the high processivity of this E3s set has remained obscure. Here, we studied the molecular mechanism and function of the CHN‐1–UFD‐2 complex in Caenorhabditis elegans. Our data show that UFD‐2 binding promotes the cooperation between CHN‐1 and ubiquitin‐conjugating E2 enzymes by stabilizing the CHN‐1 U‐box dimer. However, HSP70/HSP‐1 chaperone outcompetes UFD‐2 for CHN‐1 binding, thereby promoting a shift to the autoinhibited CHN‐1 state by acting on a conserved residue in its U‐box domain. The interaction with UFD‐2 enables CHN‐1 to efficiently ubiquitylate and regulate S‐adenosylhomocysteinase (AHCY‐1), a key enzyme in the S‐adenosylmethionine (SAM) regeneration cycle, which is essential for SAM‐dependent methylation. Our results define the molecular mechanism underlying the synergistic cooperation of CHN‐1 and UFD‐2 in substrate ubiquitylation.

Probing peptide sequences on their ability to generate affinity sites in molecularly imprinted polymers

Piletska, Elena V; Guerreiro, Antonio; Mersiyanova, Margarita; Cowen, Todd; Canfarotta, Francesco; Piletsky, Stanislav S.; Karim, Kal; Piletsky, Sergey A.
Langmuir.
Dec 2019
An array of 4000 defined and addressable tripeptides on a polymer-coated glass slide is used to synthesize molecularly imprinted polymer (MIP) nanoparticles. This work is undertaken to systematically probe the impact of the peptide sequence on the ability to generate affinity MIPs. The polymer affinity is assessed by measuring the fluorescence of bound MIP nanoparticles at each peptide spot on the surface after washing the array to remove any low-affinity polymer. The generic composition commonly used in the preparation of MIPs against proteins seems to be equally suitable for imprinting hydrophobic and hydrophilic tripeptides. The amino acids frequently contributing to the formation of high-affinity MIPs include T, F, D, N, Y, W, and P. The amino acids that rarely contribute to the formation of high-affinity interactions with MIPs are G, V, A, L, I, and M. These observations are confirmed by computational modeling. The basic technique proposed here may be applicable in optimizing polymer compositions for the production of high-affinity MIPs or, more specifically, for the selection of appropriate amino acid sequences when peptide epitopes are used instead of whole protein imprinting.

Diagnostic Profiling of the Human Public IgM Repertoire With Scalable Mimotope Libraries

Pashov, Anastas; Shivarov, Velizar; Hadzhieva, Maya; Kostov, Victor; Ferdinandov, Dilyan; Heintz, Karen-Marie; Pashova, Shina; Todorova, Milena; Vassilev, Tchavdar; Kieber-Emmons, Thomas; Meza-Zepeda, Leonardo A.; Hovig, Eivind
Front. Immunol..
Dec 2019
Specific antibody reactivities are routinely used as biomarkers, but the antibody repertoire reactivity (igome) profiles are still neglected. Here, we propose rationally designed peptide arrays as efficient probes for these system level biomarkers. Most IgM antibodies are characterized by few somatic mutations, polyspecificity, and physiological autoreactivity with housekeeping function. Previously, probing this repertoire with a set of immunodominant self-proteins provided a coarse analysis of the respective repertoire profiles. In contrast, here, we describe the generation of a peptide mimotope library that reflects the common IgM repertoire of 10,000 healthy donors. In addition, an appropriately sized subset of this quasi-complete mimotope library was further designed as a potential diagnostic tool. A 7-mer random peptide phage display library was panned on pooled human IgM. Next-generation sequencing of the selected phage yielded 224,087 sequences, which clustered in 790 sequence clusters. A set of 594 mimotopes, representative of the most significant sequence clusters, was shown to probe symmetrically the space of IgM reactivities in patients’ sera. This set of mimotopes can be easily scaled including a greater proportion of the mimotope library. The trade-off between the array size and the resolution can be explored while preserving the symmetric sampling of the mimotope sequence and reactivity spaces. BLAST search of the non-redundant protein database with the mimotopes sequences yielded significantly more immunoglobulin J region hits than random peptides, indicating a considerable idiotypic connectivity of the targeted igome. The proof of principle predictors for random diagnoses was represented by profiles of mimotopes. The number of potential reactivity profiles that can be extracted from this library is estimated at more than 1070. Thus, a quasi-complete IgM mimotope library and a scalable representative subset thereof are found to address very efficiently the dynamic diversity of the human public IgM repertoire, providing informationally dense and structurally interpretable IgM reactivity profiles.

A Low‐Cost Laser‐Based Nano‐3D Polymer Printer for Rapid Surface Patterning and Chemical Synthesis of Peptide and Glycan Microarrays

Eickelmann, Stephan; Tsouka, Alexandra; Heidepriem, Jasmin; Paris, Grigori; Zhang, Junfang; Molinari, Valerio; Mende, Marco; Loeffler, Felix F.
Adv. Mater. Technol..
Nov 2019
A low-cost laser-based printing setup is presented, which allows for the spot-wise patterning of surfaces with defined polymer nanolayers. These nanolayer spots serve as a “solid solvent,” embedding different chemicals, chemical building blocks, materials, or precursors and can be stacked on top of each other. By melting the spot pattern, the polymer-embedded molecules are released for chemical reaction. This enables researchers to quickly pattern a surface with different molecules and materials, mixing them directly on the surface for high-throughput chemical synthesis to generate and screen diverse microarray libraries. In contrast to expensive ink-jet or contact printing, this approach does not require premixing of inks, which enables in situ combinatorial mixing. Easy access and versatility of this patterning approach are shown by generating microarrays of various biomolecules, such as glycans for the first time, to screen interactions of antibodies and lectins. In addition, a layer-by-layer solid-phase synthesis of peptides directly on the microarray is presented. Amino acid–containing nanolayers are repeatedly laser-transferred and reacted with the functionalized acceptor surface in defined patterns. This simple system enables a reproducible array production, down to spot-to-spot distances of 100 µm, and offers a flexible and cheap alternative to expensive spotting robot technology.

Miniaturized and Automated Synthesis of Biomolecules—Overview and Perspectives

Mattes, Daniela S.; Jung, Nicole; Weber, Laura K.; Bräse, Stefan; Breitling, Frank
Adv. Mater..
Jun 2019
Chemical synthesis is performed by reacting different chemical building blocks with defined stoichiometry, while meeting additional conditions, such as temperature and reaction time. Such a procedure is especially suited for automation and miniaturization. Life sciences lead the way to synthesizing millions of different oligonucleotides in extremely miniaturized reaction sites, e.g., pinpointing active genes in whole genomes, while chemistry advances different types of automation. Recent progress in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) imaging could match miniaturized chemical synthesis with a powerful analytical tool to validate the outcome of many different synthesis pathways beyond applications in the life sciences. Thereby, due to the radical miniaturization of chemical synthesis, thousands of molecules can be synthesized. This in turn should allow ambitious research, e.g., finding novel synthesis routes or directly screening for photocatalysts. Herein, different technologies are discussed that might be involved in this endeavor. A special emphasis is given to the obstacles that need to be tackled when depositing tiny amounts of materials to many different extremely miniaturized reaction sites.

Quote form