Contact
Quote

Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Filter by
Filtered (14)
Filters
Show (14)
Cancel
Showing most recent

Detection of specific IgE against linear epitopes from Gal d 1 has additional value in diagnosing hen’s egg allergy in adults

Ehlers, Anna M.; Otten, Henny G.; Wierzba, Eva; Flügge, Ulrike; Le, Thuy-My; Knulst, André C.; Suer, Waltraud
Sep 2020
10.1111/cea.13730
Background Although hen’s egg allergy is more prevalent in children, up to 0.6% of adults from different European countries suffers from a persistent or newly-onset hen’s egg allergy, making accurate diagnosis in adults necessary. However, sensitisation to hen’s egg extracts, components and linear epitopes are solely studied in children. Methods Hen’s egg allergic (n=16) and tolerant (n=20) adults were selected by sensitisation towards recombinant components rGal d 1 and/or 3. Sensitisation profiles towards egg white and yolk extract and the native components Gal d 1, 2, 3 and 4 were respectively evaluated with the ImmunoCAP or the EUROLINE system. Characterisation of linear epitopes was performed with a peptide microarray containing 15mer peptides representing the entire sequence of mature Gal d 1 and 3. Results Overall, sIgE titres against hen’s egg extracts and single components overlapped largely between allergic and tolerant adults. Although the median sIgE/sIgG4 ratio to Gal d 1 was increased in allergic adults, the range was comparable between both groups. Clinically relevant sensitisation to Gal d 1 was confirmed by sIgE-binding to the linear epitopes aa30-41, aa39-50 or aa84-95 in 6/13 allergic adults, mainly suffering from objective symptoms. In comparison, these epitopes were recognized by 1/15 tolerant patient. Only a few linear epitopes were detected for Gal d 3, suggesting a greater importance of conformational epitopes for the recognition of Gal d 3. Conclusion and Clinical Relevance Specific IgE-binding to linear epitopes of Gal d 1 is highly specific in identifying hen’s egg allergic adults with objective symptoms.

Rapid response to pandemic threats: immunogenic epitope detection of pandemic pathogens for diagnostics and vaccine development using peptide microarrays

Heiss, Kirsten; Heidepriem, Jasmin; Fischer, Nico; Weber, Laura K; Dahlke, Christine; Jaenisch, Thomas; Loeffler, Felix F
J. Proteome Res..
Sep 2020
10.1021/acs.jproteome.0c00484
Emergence and re-emergence of pathogens bearing the risk of becoming a pandemic threat are on the rise. Increased travel and trade, growing population density, changes in urbanization, and climate have a critical impact on infectious disease spread. Currently, the world is confronted with the emergence of a novel coronavirus SARS-CoV-2, responsible for yet more than 500 000 deaths globally. Outbreaks caused by viruses such as SARS-CoV-2, HIV, Ebola, influenza, and Zika have increased over the last decade, underlining the urgent need for a rapid development of diagnostics and vaccines. Hence, the rational identification of biomarkers for diagnostic measures on the one hand, and antigenic targets for vaccine development on the other, are of utmost importance. Peptide microarrays can display large numbers of putative target proteins translated into overlapping linear (and cyclic) peptides. Using these highly diverse libraries, covering tens of thousands of peptides, allow for the in-depth analysis of antibody signatures in a multiplexed, high-throughput fashion. In this review, we highlight synthesis platforms that facilitate fast and highly flexible generation of high-density peptide microarrays. We further outline the multifaceted applications of these peptide array platforms for the development of serological tests and vaccines, to quickly encounter pandemic threats.

On‐Chip Neo‐Glycopeptide Synthesis for Multivalent Glycan Presentation

Mende, Marco; Tsouka, Alexandra; Heidepriem, Jasmin; Paris, Grigori; Mattes, Daniela S.; Eickelmann, Stephan; Bordoni, Vittorio; Wawrzinek, Robert; Fuchsberger, Felix F.; Seeberger, Peter H.; Rademacher, Christoph; Delbianco, Martina; Mallagaray, Alvaro; Loeffler, Felix F
Chem. Eur. J..
Apr 2020
10.1002/chem.202001291
Single glycan–protein interactions are often weak, such that glycan binding partners commonly utilize multiple, spatially defined binding sites to enhance binding avidity and specificity. Current array technologies usually neglect defined multivalent display. Laser-based array synthesis technology allows for flexible and rapid on-surface synthesis of different peptides. By combining this technique with click chemistry, neo-glycopeptides were produced directly on a functionalized glass slide in the microarray format. Density and spatial distribution of carbohydrates can be tuned, resulting in well-defined glycan structures for multivalent display. The two lectins concanavalin A and langerin were probed with different glycans on multivalent scaffolds, revealing strong spacing-, density-, and ligand-dependent binding. In addition, we could also measure the surface dissociation constant. This approach allows for a rapid generation, screening, and optimization of a multitude of multivalent scaffolds for glycan binding.

Soybean Allergy Related Epitopes

Kern, Karolin; Spiegel, Holger; Havenith, Heide; Szardenings, Michael
Nov 2018
The invention relates to a compilation comprising at least five different peptides, each peptide comprising at least one sequence element corresponding to an epitope selected from the group consisting of SEQ ID NO.: 1-354, wherein at least five different epitopes are represented. The invention further relates to an in vitro method for determining a patient’s immune status to soybean allergens, to a method for detecting at least one soybean allergen in a substance and to a method for determining the allergenicity of a soybean variety. Additionally, the invention relates to a kit comprising at least one composition containing a compound comprising at least five different sequence elements each corresponding to an epitope selected from the group consisting of SEQ ID NO.: 1-354, wherein at least five different epitopes are represented. Furthermore, the invention relates to the use of a peptide comprising a sequence element corresponding to an epitope for providing a molecule binding to a protein or peptide comprising the epitope.

The immunome of soy bean allergy: Comprehensive identification and characterization of epitopes

Kern, Karolin; Havenith, Heide; Delaroque, Nicolas; Rautenberger, Paul; Lehmann, Jörg; Fischer, Markus; Spiegel, Holger; Schillberg, Stefan; Ehrentreich-Foerster, Eva; Aurich, Stefanie; Treudler, Regina; Szardenings, Michael
Clin Exp Allergy.
Sep 2018
10.1111/cea.13285
Background The precise mapping of multiple antibody epitopes recognized by patients’ sera allows a more detailed and differentiated understanding of immunological diseases. It may lead to the development of novel therapies and diagnostic tools. Objective Mapping soy bean specific epitopes relevant for soy bean allergy patients and persons sensitized to soy bean, and analysis of their IgE/IgG binding spectrum. Methods Identification of epitopes using sera, applying an optimized peptide phage display library followed by next-generation sequencing, specially designed in silico data analysis and subsequent peptide microarray analysis. Results We were able to identify more than 400 potential epitope motifs in soy bean proteins. More than 60% of them have not yet been described as potential epitopes. Eighty-three peptides, representing the 42 most frequently found epitope candidates, were validated by microarray analysis using 50 sera from people who have been tested positive in skin prick test (SPT). Of these peptides, 56 were bound by antibodies, 55 by serum IgE, 43 by serum IgG and 30 by both. Person-specific epitope patterns were found for each individual and protein. Conclusions For individuals with clinical symptoms, epitope resolved analyses reveal a high prevalence of IgE binding to a few soy bean specific epitopes. Evaluation of individual immune profiles of patients with soy bean sensitization allows the identification of peptides that do facilitate studying individual IgE/IgG epitope binding patterns. This enables discrimination of sensitization from disease, such assay test has the potential to replace SPT assays

An improved assay for the diagnosis of peanut allergy

Suer, Waltraud; Rohwer, Stefanie; BRIX, Bettina; WEIMANN, Alf
Aug 2018
A diagnostically useful carrier has a polypeptide for specifically capturing an antibody to Ara h 7 isotype 7.0201 in a sample from a subject. A method includes detecting in a sample from a subject the presence or absence of an antibody to Ara h 7 isotype 7.0201. A pharmaceutical composition includes Ara h 7 isotype 7.0201 or a variant thereof.

Combinatorial Synthesis of Macromolecular Arrays by Microchannel Cantilever Spotting (µCS)

Atwater, Jordyn; Mattes, Daniela S.; Streit, Bettina; von Bojničić-Kninski, Clemens; Loeffler, Felix F.; Breitling, Frank; Fuchs, Harald; Hirtz, Michael
Adv. Mater..
Aug 2018
10.1002/adma.201801632
Surface-bound microarrays of multiple oligo- and macromolecules (e.g., peptides, DNA) offer versatile options in biomedical applications like drug screening, DNA analysis, or medical diagnostics. Combinatorial syntheses of these molecules in situ can save significant resources in regard to processing time and material use. Furthermore, high feature densities are needed to enable high-throughput and low sample volumes as generally regarded in combinatorial chemistry. Here, a scanning-probe-lithography-based approach for the combinatorial in situ synthesis of macromolecules is presented in microarray format. Feature sizes below 40 µm allow for the creation of high-density arrays with feature densities of 62 500 features per cm2. To demonstrate feasibility of this approach for biomedical applications, a multiplexed array of functional protein tags (HA- and FLAG-tag) is synthesized, and selective binding of respective epitope recognizing antibodies is shown. This approach uses only small amounts of base chemicals for synthesis and can be further parallelized, therefore, opening up a route to flexible, highly dense, and cost-effective microarrays.

Reductionist Approach in Peptide-Based Nanotechnology

Gazit, Ehud
Annu. Rev. Biochem..
Jun 2018
10.1146/annurev-biochem-062917-012541
The formation of ordered nanostructures by molecular self-assembly of proteins and peptides represents one of the principal directions in nanotechnology. Indeed, polyamides provide superior features as materials with diverse physical properties. A reductionist approach allowed the identification of extremely short peptide sequences, as short as dipeptides, which could form well-ordered amyloid-like β-sheet-rich assemblies comparable to supramolecular structures made of much larger proteins. Some of the peptide assemblies show remarkable mechanical, optical, and electrical characteristics. Another direction of reductionism utilized a natural noncoded amino acid, α-aminoisobutryic acid, to form short superhelical assemblies. The use of this exceptional helix inducer motif allowed the fabrication of single heptad repeats used in various biointerfaces, including their use as surfactants and DNA-binding agents. Two additional directions of the reductionist approach include the use of peptide nucleic acids (PNAs) and coassembly techniques. The diversified accomplishments of the reductionist approach, as well as the exciting future advances it bears, are discussed.

Characterization of a sandwich ELISA for the quantification of all human periostin isoforms

Gadermaier, Elisabeth; Tesarz, Manfred; Suciu, Andreea Ana-Maria; Wallwitz, Jacqueline; Berg, Gabriela; Himmler, Gottfried
J Clin Lab Anal.
Feb 2018
10.1002/jcla.22252
Background Periostin (osteoblast-specific factor OSF-2) is a secreted protein occurring in seven known isoforms, and it is involved in a variety of biological processes in osteology, tissue repair, oncology, cardiovascular and respiratory systems or allergic manifestations. To analyze functional aspects of periostin, or the ability of periostin as potential biomarker in physiological and pathological conditions, there is the need for a precise, well-characterized assay that detects periostin in peripheral blood. Methods In this study the development of a sandwich ELISA using monoclonal and affinity-purified polyclonal anti-human periostin antibodies was described. Antibodies were characterized by mapping of linear epitopes with microarray technology, and by analyzing cross-reactive binding to human periostin isoforms with western blot. The assay was validated according to ICH/EMEA guidelines. Results The monoclonal coating antibody binds to a linear epitope conserved between the isoforms. The polyclonal detection antibody recognizes multiple conserved linear epitopes. Therefore, the periostin ELISA detects all known human periostin isoforms. The assay is optimized for human serum and plasma and covers a calibration range between 125 and 4000 pmol/L for isoform 1. Assay characteristics, such as precision (intra-assay: ≤3%, inter-assay: ≤6%), spike-recovery (83%-106%), dilution linearity (95%-126%), as well as sample stability meet the standards of acceptance. Periostin levels of apparently healthy individuals are 864±269 pmol/L (serum) and 817±170 pmol/L (plasma) respectively. Conclusion This ELISA is a reliable and accurate tool for determination of all currently known periostin isoforms in human healthy and diseased samples.

A Trifunctional Linker for Purified 3D Assembled Peptide Structure Arrays

Mattes, Daniela S.; Rentschler, Simone; Foertsch, Tobias C.; Münch, Stephan W.; Loeffler, Felix F.; Nesterov-Mueller, Alexander; Bräse, Stefan; Breitling, Frank
Small Methods.
Feb 2018
10.1002/smtd.201700205
Microarrays are an important tool in modern research that allow the rapid screening of many different interactions simultaneously. Peptide arrays, which bear different peptides arranged in separate spots, permit high-throughput screening to investigate linear and cyclic binding sites. To study conformational or discontinuous binding sites, protein arrays are the major choice. However, the tremendous costs for the generation of high-density protein arrays of high purity restrict progress in protein research. Therefore, peptide-based arrays, which can mimic assembled peptide structures, have an enormous potential. Here, a method is presented to create such structures in the array format as an alternative to protein arrays. A trifunctional linker is developed with an azide, a protected alkyne, and a carboxyl group, which can react with two or three different peptides. Due to the spatial proximity, the peptides interact and can form an assembled peptide structure. As a proof of concept, assembled peptide structures are demonstrated on beads and on a polymer surface and the approach can be validated via matrix-assisted laser desorption/ionization spectrometry. Furthermore, a multistep transfer of peptide arrays is shown, generating purified assembled peptide structure arrays in high density.

Spot peptide arrays and SPR measurements: throughput and quantification in antibody selectivity studies: Peptide Arrays for Antibody Selectivity Studies

Vernet, Thierry; Choulier, Laurence; Nominé, Yves; Bellard, Laure; Baltzinger, Mireille; Travé, Gilles; Altschuh, Danièle
J. Mol. Recognit..
Oct 2015
10.1002/jmr.2477
Antibody selectivity represents a major issue in the development of efficient immuno-therapeutics and detection assays. Its description requires a comparison of the affinities of the antibody for a significant number of antigen variants. In the case of peptide antigens, this task can now be addressed to a significant level of details owing to improvements in spot peptide array technologies. They allow the high-throughput mutational analysis of peptides with, depending on assay design, an evaluation of binding stabilities. Here, we examine the cross-reactive capacity of an antibody fragment using the PEPperCHIP® technology platform (PEPperPRINT GmbH, Heidelberg, Germany; >8800 peptides per microarray) combined with the surface plasmon resonance characterization (Biacore® technology; GE-Healthcare Biacore, Uppsala, Sweden) of a subset of interactions. ScFv1F4 recognizes the N-terminal end of oncoprotein E6 of human papilloma virus 16. The spot permutation analysis (i.e. each position substituted by all amino acids except cysteine) of the wild type decapeptide (sequence 6TAMFQDPQER15) and of 15 variants thereof defined the optimal epitope and provided a ranking for variant recognition. The SPR affinity measurements mostly validated the ranking of complex stabilities deduced from array data and defined the sensitivity of spot fluorescence intensities, bringing further insight into the conditions for cross-reactivity. Our data demonstrate the importance of throughput and quantification in the assessment of antibody selectivity.

Optimised ‘on demand’ protein arraying from DNA by cell free expression with the ‘DNA to Protein Array’ (DAPA) technology

Schmidt, Ronny; Cook, Elizabeth A.; Kastelic, Damjana; Taussig, Michael J.; Stoevesandt, Oda
Journal of Proteomics.
Aug 2013
10.1016/j.jprot.2013.02.002
We have previously described a protein arraying process based on cell free expression from DNA template arrays (DNA Array to Protein Array, DAPA). Here, we have investigated the influence of different array support coatings (Ni-NTA, Epoxy, 3D-Epoxy and Polyethylene glycol methacrylate (PEGMA)). Their optimal combination yields an increased amount of detected protein and an optimised spot morphology on the resulting protein array compared to the previously published protocol. The specificity of protein capture was improved using a tag-specific capture antibody on a protein repellent surface coating. The conditions for protein expression were optimised to yield the maximum amount of protein or the best detection results using specific monoclonal antibodies or a scaffold binder against the expressed targets. The optimised DAPA system was able to increase by threefold the expression of a representative model protein while conserving recognition by a specific antibody. The amount of expressed protein in DAPA was comparable to those of classically spotted protein arrays. Reaction conditions can be tailored to suit the application of interest. Biological significance: DAPA represents a cost effective, easy and convenient way of producing protein arrays on demand. The reported work is expected to facilitate the application of DAPA for personalized medicine and screening purposes.

Quote form