Contact
Quote

Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Filter by
Filtered (11)
Filters
Show (11)
Cancel
Showing most recent

Detection of specific IgE against linear epitopes from Gal d 1 has additional value in diagnosing hen’s egg allergy in adults

Ehlers, Anna M.; Otten, Henny G.; Wierzba, Eva; Flügge, Ulrike; Le, Thuy-My; Knulst, André C.; Suer, Waltraud
Sep 2020
10.1111/cea.13730
Background Although hen’s egg allergy is more prevalent in children, up to 0.6% of adults from different European countries suffers from a persistent or newly-onset hen’s egg allergy, making accurate diagnosis in adults necessary. However, sensitisation to hen’s egg extracts, components and linear epitopes are solely studied in children. Methods Hen’s egg allergic (n=16) and tolerant (n=20) adults were selected by sensitisation towards recombinant components rGal d 1 and/or 3. Sensitisation profiles towards egg white and yolk extract and the native components Gal d 1, 2, 3 and 4 were respectively evaluated with the ImmunoCAP or the EUROLINE system. Characterisation of linear epitopes was performed with a peptide microarray containing 15mer peptides representing the entire sequence of mature Gal d 1 and 3. Results Overall, sIgE titres against hen’s egg extracts and single components overlapped largely between allergic and tolerant adults. Although the median sIgE/sIgG4 ratio to Gal d 1 was increased in allergic adults, the range was comparable between both groups. Clinically relevant sensitisation to Gal d 1 was confirmed by sIgE-binding to the linear epitopes aa30-41, aa39-50 or aa84-95 in 6/13 allergic adults, mainly suffering from objective symptoms. In comparison, these epitopes were recognized by 1/15 tolerant patient. Only a few linear epitopes were detected for Gal d 3, suggesting a greater importance of conformational epitopes for the recognition of Gal d 3. Conclusion and Clinical Relevance Specific IgE-binding to linear epitopes of Gal d 1 is highly specific in identifying hen’s egg allergic adults with objective symptoms.

Rapid response to pandemic threats: immunogenic epitope detection of pandemic pathogens for diagnostics and vaccine development using peptide microarrays

Heiss, Kirsten; Heidepriem, Jasmin; Fischer, Nico; Weber, Laura K; Dahlke, Christine; Jaenisch, Thomas; Loeffler, Felix F
J. Proteome Res..
Sep 2020
10.1021/acs.jproteome.0c00484
Emergence and re-emergence of pathogens bearing the risk of becoming a pandemic threat are on the rise. Increased travel and trade, growing population density, changes in urbanization, and climate have a critical impact on infectious disease spread. Currently, the world is confronted with the emergence of a novel coronavirus SARS-CoV-2, responsible for yet more than 500 000 deaths globally. Outbreaks caused by viruses such as SARS-CoV-2, HIV, Ebola, influenza, and Zika have increased over the last decade, underlining the urgent need for a rapid development of diagnostics and vaccines. Hence, the rational identification of biomarkers for diagnostic measures on the one hand, and antigenic targets for vaccine development on the other, are of utmost importance. Peptide microarrays can display large numbers of putative target proteins translated into overlapping linear (and cyclic) peptides. Using these highly diverse libraries, covering tens of thousands of peptides, allow for the in-depth analysis of antibody signatures in a multiplexed, high-throughput fashion. In this review, we highlight synthesis platforms that facilitate fast and highly flexible generation of high-density peptide microarrays. We further outline the multifaceted applications of these peptide array platforms for the development of serological tests and vaccines, to quickly encounter pandemic threats.

On‐Chip Neo‐Glycopeptide Synthesis for Multivalent Glycan Presentation

Mende, Marco; Tsouka, Alexandra; Heidepriem, Jasmin; Paris, Grigori; Mattes, Daniela S.; Eickelmann, Stephan; Bordoni, Vittorio; Wawrzinek, Robert; Fuchsberger, Felix F.; Seeberger, Peter H.; Rademacher, Christoph; Delbianco, Martina; Mallagaray, Alvaro; Loeffler, Felix F
Chem. Eur. J..
Apr 2020
10.1002/chem.202001291
Single glycan–protein interactions are often weak, such that glycan binding partners commonly utilize multiple, spatially defined binding sites to enhance binding avidity and specificity. Current array technologies usually neglect defined multivalent display. Laser-based array synthesis technology allows for flexible and rapid on-surface synthesis of different peptides. By combining this technique with click chemistry, neo-glycopeptides were produced directly on a functionalized glass slide in the microarray format. Density and spatial distribution of carbohydrates can be tuned, resulting in well-defined glycan structures for multivalent display. The two lectins concanavalin A and langerin were probed with different glycans on multivalent scaffolds, revealing strong spacing-, density-, and ligand-dependent binding. In addition, we could also measure the surface dissociation constant. This approach allows for a rapid generation, screening, and optimization of a multitude of multivalent scaffolds for glycan binding.

The immunome of soy bean allergy: Comprehensive identification and characterization of epitopes

Kern, Karolin; Havenith, Heide; Delaroque, Nicolas; Rautenberger, Paul; Lehmann, Jörg; Fischer, Markus; Spiegel, Holger; Schillberg, Stefan; Ehrentreich-Foerster, Eva; Aurich, Stefanie; Treudler, Regina; Szardenings, Michael
Clin Exp Allergy.
Sep 2018
10.1111/cea.13285
Background The precise mapping of multiple antibody epitopes recognized by patients’ sera allows a more detailed and differentiated understanding of immunological diseases. It may lead to the development of novel therapies and diagnostic tools. Objective Mapping soy bean specific epitopes relevant for soy bean allergy patients and persons sensitized to soy bean, and analysis of their IgE/IgG binding spectrum. Methods Identification of epitopes using sera, applying an optimized peptide phage display library followed by next-generation sequencing, specially designed in silico data analysis and subsequent peptide microarray analysis. Results We were able to identify more than 400 potential epitope motifs in soy bean proteins. More than 60% of them have not yet been described as potential epitopes. Eighty-three peptides, representing the 42 most frequently found epitope candidates, were validated by microarray analysis using 50 sera from people who have been tested positive in skin prick test (SPT). Of these peptides, 56 were bound by antibodies, 55 by serum IgE, 43 by serum IgG and 30 by both. Person-specific epitope patterns were found for each individual and protein. Conclusions For individuals with clinical symptoms, epitope resolved analyses reveal a high prevalence of IgE binding to a few soy bean specific epitopes. Evaluation of individual immune profiles of patients with soy bean sensitization allows the identification of peptides that do facilitate studying individual IgE/IgG epitope binding patterns. This enables discrimination of sensitization from disease, such assay test has the potential to replace SPT assays

Combinatorial Synthesis of Macromolecular Arrays by Microchannel Cantilever Spotting (µCS)

Atwater, Jordyn; Mattes, Daniela S.; Streit, Bettina; von Bojničić-Kninski, Clemens; Loeffler, Felix F.; Breitling, Frank; Fuchs, Harald; Hirtz, Michael
Adv. Mater..
Aug 2018
10.1002/adma.201801632
Surface-bound microarrays of multiple oligo- and macromolecules (e.g., peptides, DNA) offer versatile options in biomedical applications like drug screening, DNA analysis, or medical diagnostics. Combinatorial syntheses of these molecules in situ can save significant resources in regard to processing time and material use. Furthermore, high feature densities are needed to enable high-throughput and low sample volumes as generally regarded in combinatorial chemistry. Here, a scanning-probe-lithography-based approach for the combinatorial in situ synthesis of macromolecules is presented in microarray format. Feature sizes below 40 µm allow for the creation of high-density arrays with feature densities of 62 500 features per cm2. To demonstrate feasibility of this approach for biomedical applications, a multiplexed array of functional protein tags (HA- and FLAG-tag) is synthesized, and selective binding of respective epitope recognizing antibodies is shown. This approach uses only small amounts of base chemicals for synthesis and can be further parallelized, therefore, opening up a route to flexible, highly dense, and cost-effective microarrays.

Reductionist Approach in Peptide-Based Nanotechnology

Gazit, Ehud
Annu. Rev. Biochem..
Jun 2018
10.1146/annurev-biochem-062917-012541
The formation of ordered nanostructures by molecular self-assembly of proteins and peptides represents one of the principal directions in nanotechnology. Indeed, polyamides provide superior features as materials with diverse physical properties. A reductionist approach allowed the identification of extremely short peptide sequences, as short as dipeptides, which could form well-ordered amyloid-like β-sheet-rich assemblies comparable to supramolecular structures made of much larger proteins. Some of the peptide assemblies show remarkable mechanical, optical, and electrical characteristics. Another direction of reductionism utilized a natural noncoded amino acid, α-aminoisobutryic acid, to form short superhelical assemblies. The use of this exceptional helix inducer motif allowed the fabrication of single heptad repeats used in various biointerfaces, including their use as surfactants and DNA-binding agents. Two additional directions of the reductionist approach include the use of peptide nucleic acids (PNAs) and coassembly techniques. The diversified accomplishments of the reductionist approach, as well as the exciting future advances it bears, are discussed.

Characterization of a sandwich ELISA for the quantification of all human periostin isoforms

Gadermaier, Elisabeth; Tesarz, Manfred; Suciu, Andreea Ana-Maria; Wallwitz, Jacqueline; Berg, Gabriela; Himmler, Gottfried
J Clin Lab Anal.
Feb 2018
10.1002/jcla.22252
Background Periostin (osteoblast-specific factor OSF-2) is a secreted protein occurring in seven known isoforms, and it is involved in a variety of biological processes in osteology, tissue repair, oncology, cardiovascular and respiratory systems or allergic manifestations. To analyze functional aspects of periostin, or the ability of periostin as potential biomarker in physiological and pathological conditions, there is the need for a precise, well-characterized assay that detects periostin in peripheral blood. Methods In this study the development of a sandwich ELISA using monoclonal and affinity-purified polyclonal anti-human periostin antibodies was described. Antibodies were characterized by mapping of linear epitopes with microarray technology, and by analyzing cross-reactive binding to human periostin isoforms with western blot. The assay was validated according to ICH/EMEA guidelines. Results The monoclonal coating antibody binds to a linear epitope conserved between the isoforms. The polyclonal detection antibody recognizes multiple conserved linear epitopes. Therefore, the periostin ELISA detects all known human periostin isoforms. The assay is optimized for human serum and plasma and covers a calibration range between 125 and 4000 pmol/L for isoform 1. Assay characteristics, such as precision (intra-assay: ≤3%, inter-assay: ≤6%), spike-recovery (83%-106%), dilution linearity (95%-126%), as well as sample stability meet the standards of acceptance. Periostin levels of apparently healthy individuals are 864±269 pmol/L (serum) and 817±170 pmol/L (plasma) respectively. Conclusion This ELISA is a reliable and accurate tool for determination of all currently known periostin isoforms in human healthy and diseased samples.

A Trifunctional Linker for Purified 3D Assembled Peptide Structure Arrays

Mattes, Daniela S.; Rentschler, Simone; Foertsch, Tobias C.; Münch, Stephan W.; Loeffler, Felix F.; Nesterov-Mueller, Alexander; Bräse, Stefan; Breitling, Frank
Small Methods.
Feb 2018
10.1002/smtd.201700205
Microarrays are an important tool in modern research that allow the rapid screening of many different interactions simultaneously. Peptide arrays, which bear different peptides arranged in separate spots, permit high-throughput screening to investigate linear and cyclic binding sites. To study conformational or discontinuous binding sites, protein arrays are the major choice. However, the tremendous costs for the generation of high-density protein arrays of high purity restrict progress in protein research. Therefore, peptide-based arrays, which can mimic assembled peptide structures, have an enormous potential. Here, a method is presented to create such structures in the array format as an alternative to protein arrays. A trifunctional linker is developed with an azide, a protected alkyne, and a carboxyl group, which can react with two or three different peptides. Due to the spatial proximity, the peptides interact and can form an assembled peptide structure. As a proof of concept, assembled peptide structures are demonstrated on beads and on a polymer surface and the approach can be validated via matrix-assisted laser desorption/ionization spectrometry. Furthermore, a multistep transfer of peptide arrays is shown, generating purified assembled peptide structure arrays in high density.

Combinatorial Peptide Synthesis on a Microchip

Schirwitz, Christopher; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Leibe, Klaus; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Stadler, Volker; Breitling, Frank; Bischoff, F. Ralf
Current Protocols in Protein Science.
Aug 2009
10.1002/0471140864.ps1802s57
Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm2 can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Particle-Based Synthesis of Peptide Arrays

Breitling, Frank; Felgenhauer, Thomas; Nesterov, Alexander; Lindenstruth, Volker; Stadler, Volker; Bischoff, F. Ralf
ChemBioChem.
Mar 2009
10.1002/cbic.200800735
Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

High-density peptide arrays

Breitling, Frank; Nesterov, Alexander; Stadler, Volker; Felgenhauer, Thomas; Bischoff, F. Ralf
Mol. BioSyst..
Jan 2009
10.1039/b819850k
Arrays promise to advance biology by allowing parallel screening for many different binding partners. Meanwhile, lithographic methods enable combinatorial synthesis of >50 000 oligonucleotides per cm2, an advance that has revolutionized the whole field of genomics. A similar development is expected for the field of proteomics, provided that affordable, very high-density peptide arrays are available. However, peptide arrays lag behind oligonucleotide arrays. This review discusses recent developments in the field with an emphasis on methods that lead to very high-density peptide arrays.

Quote form