Contact
Quote

Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Filter by
Filtered (11)
Filters
Show (11)
Cancel
Showing most recent

Peptide Epitopes of NC16A BP180 in the Diagnostics of Bullous Pemphigoid

Lytton, Simon D.; Wagger, Christine; Meyersburg, Damian; Mussnig, Birgit; Lang, Roland; Maglie, Roberto; Anzengruber, Florian; Antiga, Emiliano; Hall, Russell P.; Bauer, Johann W.
JID Innovations.
Nov 2025
10.1016/j.xjidi.2025.100415

Preclinical characterization of an active immunotherapy targeting calcitonin gene-related peptide

Boyd, Justin D.; Wang, Shixia; Lin, Hsiao-Wen; Hsieh, Yueh-Ting; Sun, Yu Shuang; Thibodeaux, Brett A.; Lu, Hanxin; Sahni, Jaya; Wiggins, Jonathan; Longo, Matthew S.; Brooks, Jeanne K.; Vroom, Madeline M.; Chang, Yi-Pin; Liu, Zhi; Ding, Shuang; Dodart, Jean-Cosme
Commun Med.
Apr 2025
10.1038/s43856-025-00870-2
Abstract **Background** The success of passive immunotherapies targeting Calcitonin gene-related peptide (CGRP) for managing migraine has prompted our efforts towards developing an active immunotherapy that induces the production of endogenous antibodies against CGRP. Achieving efficacious antibody titers via immunization could provide a more convenient and cost-effective treatment alternative to anti-CGRP monoclonal antibody (mAb) therapies. However, immunization against endogenous CGRP faces multiple challenges such as breaking immune tolerance, inducing sufficient antibody titers, and avoiding immune response-associated toxicity. **Methods** Synthetic peptide immunogens formulated in adjuvants were delivered intramuscularly. Serum samples were collected post immunization and used to measure antibody titers as well as for the isolation of antibodies specific to CGRP. Antibodies were characterized for their binding affinities and specificities. The capsaicin-induced increase in dermal blood flow model was used in rats for the assessment of the pharmacodynamic effect of immunization. **Results** Here we demonstrate that a peptide-based active immunotherapy designed to induce antibodies against CGRP promotes robust antibody titers across preclinical species. Characterization of the immune response strongly suggests that this peptide immunogen primarily stimulates a humoral response and only induced CGRP-specific antibodies. Antibodies produced by immunization are primarily IgG1 and demonstrate binding and activity potencies similar to marketed monoclonal antibodies against CGRP. Finally, immunization demonstrates in vivo efficacy in a rat pharmacodynamic model. **Conclusion** Our results strongly suggest that a peptide-based active immunotherapy against CGRP could provide an affordable and convenient therapeutic for the prevention of migraine.

HCV immunodominant peptide mapping reveals unique HLA-A*02-restricted signatures: insights for CD8+ T-cell-based vaccines and immunotherapies

Cardoso Corrêa-Dias, Laura; Lopes-Ribeiro, Ágata; Marques-Ferreira, Geovane; Gomes-de-Pontes, Letícia; Pereira-Santos, Thaiza Aline; De Sousa Reis, Erik Vinicius; Silva Moraes, Thaís De Fátima; Assis Martins-Filho, Olindo; Figueiredo Barbosa-Stancioli, Edel; Guimarães Da Fonseca, Flávio; Coelho-dos-Reis, Jordana Grazziela
Immunogenetics.
Jan 2025
10.1007/s00251-025-01370-2
Several barriers for the development of an HCV vaccine still exist, including the genetic diversity of the virus, and the shortage of assessable models for in vitro and in vivo assays. Therefore, in this study, HCV epitope mapping was performed for 59 polyprotein sequences from 7 HCV genotypes. Around 2,880 peptides were considered epitopes for CD8+ T cells. The peptide induction of cytokines from Th1 and/or Th2 axes of the cellular immune response was assessed, indicating a tendency for Th2 axis. In vitro evaluation was performed using peptide microarray and a recombinant HLA-A*02:01 molecule. A total of 615 peptides of high reactivity to HLA-A*02:01 were identified, with predominance of leucine and tryptophan residues, highlighting their importance for TCR-epitope binding and CD8+ T activation. Finally, HCV-derived peptide patterns restricted to HLA-A2*02:01 observed in this study provide important information for the development of a multi-epitope-based pan-genotypic vaccine against the virus.

High-throughput identification of immunoreactive peptides and corresponding proteins from Anaplasma platys and Ehrlichia canis using peptide microarray chips

Llanes, Alejandro; Madesh, Swetha; Brangulis, Kalvis; Rajeev, Sreekumari
Front Cell Infect Microbiol.
Jan 2025
10.3389/fcimb.2025.1671309
INTRODUCTION: Anaplasma platys and Ehrlichia canis are rickettsial pathogens infecting dogs, with a worldwide distribution. Both species are obligate intracellular pathogens and colonize bone marrow-derived cells, with coinfections frequently reported in dogs. Although E. canis immunodominant proteins have been thoroughly characterized, very few high-throughput studies have been conducted to identify immunogenic proteins from Anaplasma spp. In this study, we used a methodology based on peptide microarray chips to identify immunoreactive peptides, either shared or species-specific, in the complete theoretical proteomes of both pathogens. METHODS: B-cell epitopes were predicted in the corresponding proteins from both species and ranked for synthesis on the peptide microarrays. These microarrays were screened with serum samples from antibody-positive dogs, as well as negative control sera from unexposed dogs. Additionally, we assessed the feasibility of integrating evidence gathered at the level of individual peptides to identify potentially immunogenic proteins contributing to the patterns of immunoreactivity observed on microarrays. RESULTS: Screening of peptide microarrays resulted in complex antibody reactivity patterns against thousands of peptides. After discarding peptides with cross-reactivity to negative control sera, we identified over 1,200 immunoreactive peptides, including ~80 peptides shared between the two species with almost identical sequences. Despite screening linear peptides, we were able to identify proteins previously reported as immunodominant in E. canis, some of which contain predominantly conformational epitopes. DISCUSSION: Our results suggest that a high-throughput strategy based on peptide microarrays is an effective approach for the rapid identification of immunoreactive peptides and the underlying immunogenic proteins. This study provides a foundation for developing novel diagnostic tools and vaccine candidates against A. platys and E. canis, including potential combined or multivalent formulations targeting both pathogens.

A polyclonal antibody based immunoassay detects seven subtypes of Shiga toxin 2 produced by Escherichia coli in human and environmental samples

He, Xiaohua; Patfield, Stephanie; Hnasko, Robert; Rasooly, Reuven; Mandrell, Robert E.
PLoS ONE.
Oct 2013
10.1371/journal.pone.0076368
BACKGROUND: Shiga toxin-producing Escherichia coli (STEC) are frequent causes of severe human diseases ranging from diarrhea to hemolytic uremic syndrome. The existing strategy for detection of STEC relies on the unique sorbitol-negative fermentation property of the O157 strains, the most commonly identified serotype has been E. coli O157. It is becoming increasingly evident, however, that numerous non-O157 STEC serotypes also cause outbreaks and severe illnesses. It is necessary to have new methods that are capable of detecting all STEC strains. METHODS AND FINDINGS: Here we describe the development of a sandwich ELISA assay for detecting both O157 and non-O157 STECs by incorporating a novel polyclonal antibody (pAb) against Stx2. The newly established immunoassay was capable of detecting Stx2a spiked in environmental samples with a limit of detection between 10 and 100 pg/mL in soil and between 100 and 500 pg/mL in feces. When applied to 36 bacterial strains isolated from human and environmental samples, this assay detected Stx2 in all strains that were confirmed to be stx2-positive by real-time PCR, demonstrating a 100% sensitivity and specificity. CONCLUSIONS: The sandwich ELISA developed in this study will enable any competent laboratory to identify and characterize Stx2-producing O157 and non-O157 strains in human and environmental samples, resulting in rapid diagnosis and patient care. The results of epitope mapping from this study will be useful for further development of a peptide-based antibody and vaccine.

Optimised ‘on demand’ protein arraying from DNA by cell free expression with the ‘DNA to Protein Array’ (DAPA) technology

Schmidt, Ronny; Cook, Elizabeth A.; Kastelic, Damjana; Taussig, Michael J.; Stoevesandt, Oda
Journal of Proteomics.
Aug 2013
10.1016/j.jprot.2013.02.002
We have previously described a protein arraying process based on cell free expression from DNA template arrays (DNA Array to Protein Array, DAPA). Here, we have investigated the influence of different array support coatings (Ni-NTA, Epoxy, 3D-Epoxy and Polyethylene glycol methacrylate (PEGMA)). Their optimal combination yields an increased amount of detected protein and an optimised spot morphology on the resulting protein array compared to the previously published protocol. The specificity of protein capture was improved using a tag-specific capture antibody on a protein repellent surface coating. The conditions for protein expression were optimised to yield the maximum amount of protein or the best detection results using specific monoclonal antibodies or a scaffold binder against the expressed targets. The optimised DAPA system was able to increase by threefold the expression of a representative model protein while conserving recognition by a specific antibody. The amount of expressed protein in DAPA was comparable to those of classically spotted protein arrays. Reaction conditions can be tailored to suit the application of interest. Biological significance: DAPA represents a cost effective, easy and convenient way of producing protein arrays on demand. The reported work is expected to facilitate the application of DAPA for personalized medicine and screening purposes.

Purification of High-Complexity Peptide Microarrays by Spatially Resolved Array Transfer to Gold-Coated Membranes

Schirwitz, Christopher; Loeffler, Felix F.; Felgenhauer, Thomas; Stadler, Volker; Nesterov-Mueller, Alexander; Dahint, Reiner; Breitling, Frank; Bischoff, F. Ralf
Adv. Mater..
Mar 2013
10.1002/adma.201203853
A method for the one-step purification of high-complexity peptide microarrays is presented. The entire peptide library is transferred from the synthesis support to a gold coated polyvinylidenfluoride (PVDF) membrane, whereby only full-length peptides covalently couple to the receptor membrane via an N-terminally added cysteine. Highly resolved peptide transfer and purification of up to 10 000 features per cm2 is demonstrated.

Combinatorial Peptide Synthesis on a Microchip

Schirwitz, Christopher; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Leibe, Klaus; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Stadler, Volker; Breitling, Frank; Bischoff, F. Ralf
Current Protocols in Protein Science.
Aug 2009
10.1002/0471140864.ps1802s57
Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm2 can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Particle-Based Synthesis of Peptide Arrays

Breitling, Frank; Felgenhauer, Thomas; Nesterov, Alexander; Lindenstruth, Volker; Stadler, Volker; Bischoff, F. Ralf
ChemBioChem.
Mar 2009
10.1002/cbic.200800735
Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

High-density peptide arrays

Breitling, Frank; Nesterov, Alexander; Stadler, Volker; Felgenhauer, Thomas; Bischoff, F. Ralf
Mol. BioSyst..
Jan 2009
10.1039/b819850k
Arrays promise to advance biology by allowing parallel screening for many different binding partners. Meanwhile, lithographic methods enable combinatorial synthesis of >50 000 oligonucleotides per cm2, an advance that has revolutionized the whole field of genomics. A similar development is expected for the field of proteomics, provided that affordable, very high-density peptide arrays are available. However, peptide arrays lag behind oligonucleotide arrays. This review discusses recent developments in the field with an emphasis on methods that lead to very high-density peptide arrays.

A Novel Combinatorial Approach to High-Density Peptide Arrays

Beyer, Mario; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Schirwitz, Christopher; Leibe, Klaus; Bischoff, Ralf F.; Breitling, Frank; Stadler, Volker
Jan 2009
10.1007/978-1-60327-394-7_16
Combinatorial synthesis of peptides on solid supports (1), either as spots on cellulose membranes (2) or with split-pool-libraries on polymer beads (3), substantially forwarded research in the field of peptide-protein interactions. Admittedly, these concepts have specific limitations, on one hand the number of synthesizable peptide sequences per area, on the other hand elaborate decoding/encoding strategies, false-positive results and sequence limitations. We recently established a method to produce high-density peptide arrays on microelectronic chips (4). Solid amino acid microparticles were charged by friction and transferred to defined pixel electrodes onto the chip’s surface, where they couple to a functional polymer coating simply upon melting (Fig. 16.1 A-D,F). By applying standard Fmoc chemistry according to Merrifield, peptide array densities of up to 40,000 spots per square centimetre were achieved (Fig. 16.1G). The term Merrifield synthesis describes the consecutive linear coupling and deprotecting of L-amino acids modified with base-labile fluorenylmethoxy (Fmoc) groups at the N-terminus and different acid-sensitive protecting groups at their side chains. Removing side chain protecting groups takes place only once at the very end of each synthesis and generates the natural peptide sequence thereby.

Quote form