Contact
Quote

Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Filter by
Filtered (9)
Filters
Show (9)
Cancel
Showing most recent

High-throughput identification of immunoreactive peptides and corresponding proteins from Anaplasma platys and Ehrlichia canis using peptide microarray chips

Llanes, Alejandro; Madesh, Swetha; Brangulis, Kalvis; Rajeev, Sreekumari
Front Cell Infect Microbiol.
Jan 2025
10.3389/fcimb.2025.1671309
INTRODUCTION: Anaplasma platys and Ehrlichia canis are rickettsial pathogens infecting dogs, with a worldwide distribution. Both species are obligate intracellular pathogens and colonize bone marrow-derived cells, with coinfections frequently reported in dogs. Although E. canis immunodominant proteins have been thoroughly characterized, very few high-throughput studies have been conducted to identify immunogenic proteins from Anaplasma spp. In this study, we used a methodology based on peptide microarray chips to identify immunoreactive peptides, either shared or species-specific, in the complete theoretical proteomes of both pathogens. METHODS: B-cell epitopes were predicted in the corresponding proteins from both species and ranked for synthesis on the peptide microarrays. These microarrays were screened with serum samples from antibody-positive dogs, as well as negative control sera from unexposed dogs. Additionally, we assessed the feasibility of integrating evidence gathered at the level of individual peptides to identify potentially immunogenic proteins contributing to the patterns of immunoreactivity observed on microarrays. RESULTS: Screening of peptide microarrays resulted in complex antibody reactivity patterns against thousands of peptides. After discarding peptides with cross-reactivity to negative control sera, we identified over 1,200 immunoreactive peptides, including ~80 peptides shared between the two species with almost identical sequences. Despite screening linear peptides, we were able to identify proteins previously reported as immunodominant in E. canis, some of which contain predominantly conformational epitopes. DISCUSSION: Our results suggest that a high-throughput strategy based on peptide microarrays is an effective approach for the rapid identification of immunoreactive peptides and the underlying immunogenic proteins. This study provides a foundation for developing novel diagnostic tools and vaccine candidates against A. platys and E. canis, including potential combined or multivalent formulations targeting both pathogens.

Combinatorial Synthesis of Macromolecular Arrays by Microchannel Cantilever Spotting (µCS)

Atwater, Jordyn; Mattes, Daniela S.; Streit, Bettina; von Bojničić-Kninski, Clemens; Loeffler, Felix F.; Breitling, Frank; Fuchs, Harald; Hirtz, Michael
Adv. Mater..
Aug 2018
10.1002/adma.201801632
Surface-bound microarrays of multiple oligo- and macromolecules (e.g., peptides, DNA) offer versatile options in biomedical applications like drug screening, DNA analysis, or medical diagnostics. Combinatorial syntheses of these molecules in situ can save significant resources in regard to processing time and material use. Furthermore, high feature densities are needed to enable high-throughput and low sample volumes as generally regarded in combinatorial chemistry. Here, a scanning-probe-lithography-based approach for the combinatorial in situ synthesis of macromolecules is presented in microarray format. Feature sizes below 40 µm allow for the creation of high-density arrays with feature densities of 62 500 features per cm2. To demonstrate feasibility of this approach for biomedical applications, a multiplexed array of functional protein tags (HA- and FLAG-tag) is synthesized, and selective binding of respective epitope recognizing antibodies is shown. This approach uses only small amounts of base chemicals for synthesis and can be further parallelized, therefore, opening up a route to flexible, highly dense, and cost-effective microarrays.

Reductionist Approach in Peptide-Based Nanotechnology

Gazit, Ehud
Annu. Rev. Biochem..
Jun 2018
10.1146/annurev-biochem-062917-012541
The formation of ordered nanostructures by molecular self-assembly of proteins and peptides represents one of the principal directions in nanotechnology. Indeed, polyamides provide superior features as materials with diverse physical properties. A reductionist approach allowed the identification of extremely short peptide sequences, as short as dipeptides, which could form well-ordered amyloid-like β-sheet-rich assemblies comparable to supramolecular structures made of much larger proteins. Some of the peptide assemblies show remarkable mechanical, optical, and electrical characteristics. Another direction of reductionism utilized a natural noncoded amino acid, α-aminoisobutryic acid, to form short superhelical assemblies. The use of this exceptional helix inducer motif allowed the fabrication of single heptad repeats used in various biointerfaces, including their use as surfactants and DNA-binding agents. Two additional directions of the reductionist approach include the use of peptide nucleic acids (PNAs) and coassembly techniques. The diversified accomplishments of the reductionist approach, as well as the exciting future advances it bears, are discussed.

A Trifunctional Linker for Purified 3D Assembled Peptide Structure Arrays

Mattes, Daniela S.; Rentschler, Simone; Foertsch, Tobias C.; Münch, Stephan W.; Loeffler, Felix F.; Nesterov-Mueller, Alexander; Bräse, Stefan; Breitling, Frank
Small Methods.
Feb 2018
10.1002/smtd.201700205
Microarrays are an important tool in modern research that allow the rapid screening of many different interactions simultaneously. Peptide arrays, which bear different peptides arranged in separate spots, permit high-throughput screening to investigate linear and cyclic binding sites. To study conformational or discontinuous binding sites, protein arrays are the major choice. However, the tremendous costs for the generation of high-density protein arrays of high purity restrict progress in protein research. Therefore, peptide-based arrays, which can mimic assembled peptide structures, have an enormous potential. Here, a method is presented to create such structures in the array format as an alternative to protein arrays. A trifunctional linker is developed with an azide, a protected alkyne, and a carboxyl group, which can react with two or three different peptides. Due to the spatial proximity, the peptides interact and can form an assembled peptide structure. As a proof of concept, assembled peptide structures are demonstrated on beads and on a polymer surface and the approach can be validated via matrix-assisted laser desorption/ionization spectrometry. Furthermore, a multistep transfer of peptide arrays is shown, generating purified assembled peptide structure arrays in high density.

Optimised ‘on demand’ protein arraying from DNA by cell free expression with the ‘DNA to Protein Array’ (DAPA) technology

Schmidt, Ronny; Cook, Elizabeth A.; Kastelic, Damjana; Taussig, Michael J.; Stoevesandt, Oda
Journal of Proteomics.
Aug 2013
10.1016/j.jprot.2013.02.002
We have previously described a protein arraying process based on cell free expression from DNA template arrays (DNA Array to Protein Array, DAPA). Here, we have investigated the influence of different array support coatings (Ni-NTA, Epoxy, 3D-Epoxy and Polyethylene glycol methacrylate (PEGMA)). Their optimal combination yields an increased amount of detected protein and an optimised spot morphology on the resulting protein array compared to the previously published protocol. The specificity of protein capture was improved using a tag-specific capture antibody on a protein repellent surface coating. The conditions for protein expression were optimised to yield the maximum amount of protein or the best detection results using specific monoclonal antibodies or a scaffold binder against the expressed targets. The optimised DAPA system was able to increase by threefold the expression of a representative model protein while conserving recognition by a specific antibody. The amount of expressed protein in DAPA was comparable to those of classically spotted protein arrays. Reaction conditions can be tailored to suit the application of interest. Biological significance: DAPA represents a cost effective, easy and convenient way of producing protein arrays on demand. The reported work is expected to facilitate the application of DAPA for personalized medicine and screening purposes.

Purification of High-Complexity Peptide Microarrays by Spatially Resolved Array Transfer to Gold-Coated Membranes

Schirwitz, Christopher; Loeffler, Felix F.; Felgenhauer, Thomas; Stadler, Volker; Nesterov-Mueller, Alexander; Dahint, Reiner; Breitling, Frank; Bischoff, F. Ralf
Adv. Mater..
Mar 2013
10.1002/adma.201203853
A method for the one-step purification of high-complexity peptide microarrays is presented. The entire peptide library is transferred from the synthesis support to a gold coated polyvinylidenfluoride (PVDF) membrane, whereby only full-length peptides covalently couple to the receptor membrane via an N-terminally added cysteine. Highly resolved peptide transfer and purification of up to 10 000 features per cm2 is demonstrated.

Combinatorial Peptide Synthesis on a Microchip

Schirwitz, Christopher; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Leibe, Klaus; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Stadler, Volker; Breitling, Frank; Bischoff, F. Ralf
Current Protocols in Protein Science.
Aug 2009
10.1002/0471140864.ps1802s57
Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm2 can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Particle-Based Synthesis of Peptide Arrays

Breitling, Frank; Felgenhauer, Thomas; Nesterov, Alexander; Lindenstruth, Volker; Stadler, Volker; Bischoff, F. Ralf
ChemBioChem.
Mar 2009
10.1002/cbic.200800735
Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

High-density peptide arrays

Breitling, Frank; Nesterov, Alexander; Stadler, Volker; Felgenhauer, Thomas; Bischoff, F. Ralf
Mol. BioSyst..
Jan 2009
10.1039/b819850k
Arrays promise to advance biology by allowing parallel screening for many different binding partners. Meanwhile, lithographic methods enable combinatorial synthesis of >50 000 oligonucleotides per cm2, an advance that has revolutionized the whole field of genomics. A similar development is expected for the field of proteomics, provided that affordable, very high-density peptide arrays are available. However, peptide arrays lag behind oligonucleotide arrays. This review discusses recent developments in the field with an emphasis on methods that lead to very high-density peptide arrays.

Quote form