Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Functional screening for anti-CMV biologics identifies a broadly neutralizing epitope of an essential envelope protein

Gardner, Thomas J.; Stein, Kathryn R.; Duty, J. Andrew; Schwarz, Toni M.; Noriega, Vanessa M.; Kraus, Thomas; Moran, Thomas M.; Tortorella, Domenico
Nat Commun.
Dec 2016
The prototypic β-herpesvirus human cytomegalovirus (CMV) establishes life-long persistence within its human host. The CMV envelope consists of various protein complexes that enable wide viral tropism. More specifically, the glycoprotein complex gH/gL/gO (gH-trimer) is required for infection of all cell types, while the gH/gL/UL128/130/131a (gH-pentamer) complex imparts specificity in infecting epithelial, endothelial and myeloid cells. Here we utilize state-of-the-art robotics and a high-throughput neutralization assay to screen and identify monoclonal antibodies (mAbs) targeting the gH glycoproteins that display broad-spectrum properties to inhibit virus infection and dissemination. Subsequent biochemical characterization reveals that the mAbs bind to gH-trimer and gH-pentamer complexes and identify the antibodies’ epitope as an ‘antigenic hot spot’ critical for virus entry. The mAbs inhibit CMV infection at a post-attachment step by interacting with a highly conserved central alpha helix-rich domain. The platform described here provides the framework for development of effective CMV biologics and vaccine design strategies.

Identification of novel antigens contributing to autoimmunity in cardiovascular diseases

Müller, Anna-Maria; Bockstahler, Mariella; Hristov, Georgi; Weiß, Christel; Fischer, Andrea; Korkmaz-Icöz, Sevil; Giannitsis, Evangelos; Poller, Wolfgang; Schultheiss, Heinz-Peter; Katus, Hugo A.; Kaya, Ziya
Clinical Immunology.
Dec 2016
In myocarditis and dilated cardiomyopathy (DCM) patients the immune system may play an important role in disease progression. In this study, we aimed to identify new antigens as a target for autoimmune response that might play a crucial role in these diseases. Therefore, a peptide-array was used to investigate antibody binding profiles in patients with autoimmune myocarditis or DCM compared to healthy controls and thus to identify disease relevant antigens. To analyze the pathogenicity of the identified antigens, an experimental autoimmune myocarditis (EAM) model was used. Hereby, 3 peptide sequences, derived from myosin-binding-protein-C (MYBPC) fast-type, RNA-binding-protein 20 (RBM20), and dystrophin, showed pathogenic effects on the myocardium of mice. In summary, 3 potentially cardiopathogenic peptides (MYBPC fast-type, RBM20, dystrophin) were identified. Thus, this study could serve as a basis for future investigations aimed at determining further antigens leading to pathogenic effects on the myocardium of DCM as well as myocarditis patients.

A single amino acid substitution alter antigenicity of Glycosylated protein 4 of HP-PRRSV

Wang, Xinglong; Wang, Zhenbin; Xu, Hongyu; Biao, Xiang; Yang, Zengqi
Virol J.
Jul 2016
Background Porcine reproductive and respiratory syndrome (PRRS) is an important pig endemic disease in pork-producing countries worldwide. The etiology, porcine reproductive and respiratory syndrome virus (PRRSV), is characterized by fast antigen variability. Glycosylated protein 4 (GP4) is a minor protein in PRRSV virion, but contributes to induce protective immune responses. However, the antigenic characterization of PRRSV GP4 and the role of the mutations in this protein in PRRSV evolution are not clear. Methods Peptides chip scanning and peptide based ELISA was used to analyze the antigenic characterization of HP-PRRSV GP4. A total of 142 peptides printed on a chip were used to reveal the antigen reaction characteristics of the HP-PRRSV. The reactions of these peptides with HP-PRRSV-specific pig serum were scanned and quantified using the software PepSlide® Analyzer by fluorescence intensity. The active reaction regions (AR) were identified based on the scanning results and then the amino acids (aa) sequences of AR(s) is aligned among PRRSV strains for further identify the key aa site(s) impact the antigenicity of the protein. Peptide based ELISA is then reacted with PRRSV positive sera derived from pig inoculated with different PRRSV strains for further analysis the role of specific amino acid in AR. Results The intensity plot was used to show the reactions of the peptides with PRRSV serum and it showed that enormously different response happened to various parts of GP4. The highest reaction intensity value reached 6401.5 against one peptide with the sequence DIKTNTTAASDFVVL. An AR from S29 to G56 was identified. Sequence alignment revealed various mutations in site 43 and possibly played an important role in this AR. Peptides ELISA reaction with sera from pigs inoculated with different PRRSV strain revealed that the change of aa in site 43 reduced the reaction of the peptide with PRRSV positive sera derived from pigs inoculated with the peptide related PRRSV strains. Conclusion In this study, one AR covering S29 to G56 was identified in GP4. The aa in site 43 play an important role in determining the antigenic character of GP4. The continual mutations (S → G → D → N) occurred in this site alter the antigenicity of PRRSV GP4.

High-Density Peptide Arrays for Malaria Vaccine Development

Loeffler, Felix F.; Pfeil, Johannes; Heiss, Kirsten
The development of an efficacious and practicable vaccine conferring sterile immunity towards a Plasmodium infection represents a not yet achieved goal. A crucial factor for the impact of a given anti-plasmodial subunit vaccine is the identification of the most potent parasitic components required to induce protection from both infection and disease. Here, we present a method based on a novel high-density peptide array technology that allows for a flexible readout of malaria antibodies. Peptide arrays applied as a screening method can be used to identify novel immunogenic antibody epitopes under a large number of potential antigens/peptides. Ultimately, discovered antigen candidates and/or epitope sequences can be translated into vaccine prototype design. The technology can be further utilized to unravel antibody-mediated immune responses (e.g., involved in the establishment of semi-immunity) and moreover to confirm vaccine potency during the process of clinical development by verifying the induced antibody responses following vaccination.

Serum peptide reactivities may distinguish neuromyelitis optica subgroups and multiple sclerosis

Metz, Imke; Beißbarth, Tim; Ellenberger, David; Pache, Florence; Stork, Lidia; Ringelstein, Marius; Aktas, Orhan; Jarius, Sven; Wildemann, Brigitte; Dihazi, Hassan; Friede, Tim; Brück, Wolfgang; Ruprecht, Klemens; Paul, Friedemann
Neurol Neuroimmunol Neuroinflamm.
Apr 2016
Objective: To assess in an observational study whether serum peptide antibody reactivities may distinguish aquaporin-4 (AQP4) antibody (Ab)–positive and -negative neuromyelitis optica spectrum disorders (NMOSD) and relapsing-remitting multiple sclerosis (RRMS). Methods: We screened 8,700 peptides that included human and viral antigens of potential relevance for inflammatory demyelinating diseases and random peptides with pooled sera from different patient groups and healthy controls to set up a customized microarray with 700 peptides. With this microarray, we tested sera from 66 patients with AQP4-Ab-positive (n = 16) and AQP4-Ab-negative (n = 19) NMOSD, RRMS (n = 11), and healthy controls (n = 20). Results: Differential peptide reactivities distinguished NMOSD subgroups from RRMS in 80% of patients. However, the 2 NMOSD subgroups were not well-discriminated, although those patients are clearly separated by their antibody reactivities against AQP4 in cell-based assays. Elevated reactivities to myelin and Epstein-Barr virus peptides were present in RRMS and to AQP4 and AQP1 peptides in AQP4-Ab-positive NMOSD. Conclusions: While AQP4-Ab-positive and -negative NMOSD subgroups are not well-discriminated by peptide antibody reactivities, our findings suggest that peptide antibody reactivities may have the potential to distinguish between both NMOSD subgroups and MS. Future studies should thus concentrate on evaluating peptide antibody reactivities for the differentiation of AQP4-Ab-negative NMOSD and MS.

HIV-1 gp140 epitope recognition is influenced by immunoglobulin DH gene segment sequence

Wang, Yuge; Kapoor, Pratibha; Parks, Robert; Silva-Sanchez, Aaron; Alam, S. Munir; Verkoczy, Laurent; Liao, Hua-Xin; Zhuang, Yingxin; Burrows, Peter; Levinson, Michael; Elgavish, Ada; Cui, Xiangqin; Haynes, Barton F.; Schroeder, Harry
Immunogenetics.
Feb 2016
Complementarity Determining Region 3 of the immunoglobulin (Ig) H chain (CDR-H3) lies at the center of the antigen-binding site where it often plays a decisive role in antigen recognition and binding. Amino acids encoded by the diversity (DH) gene segment are the main component of CDR-H3. Each DH has the potential to rearrange into one of six DH reading frames (RFs), each of which exhibits a characteristic amino acid hydrophobicity signature that has been conserved among jawed vertebrates by natural selection. A preference for use of RF1 promotes the incorporation of tyrosine into CDR-H3 while suppressing the inclusion of hydrophobic or charged amino acids. To test the hypothesis that these evolutionary constraints on DH sequence influence epitope recognition, we used mice with a single DH that has been altered to preferentially use RF2 or inverted RF1. B cells in these mice produce a CDR-H3 repertoire that is enriched for valine or arginine in place of tyrosine. We serially immunized this panel of mice with gp140 from HIV-1 JR-FL isolate and then used enzyme-linked immunosorbent assay (ELISA) or peptide microarray to assess antibody binding to key or overlapping HIV-1 envelope epitopes. By ELISA, serum reactivity to key epitopes varied by DH sequence. By microarray, sera with Ig CDR-H3s enriched for arginine bound to linear peptides with a greater range of hydrophobicity but had a lower intensity of binding than sera containing Ig CDR-H3s enriched for tyrosine or valine. We conclude that patterns of epitope recognition and binding can be heavily influenced by DH germ line sequence. This may help explain why antibodies in HIV-infected patients must undergo extensive somatic mutation in order to bind to specific viral epitopes and achieve neutralization.

Single-Molecule Detection on a Protein-Array Assay Platform for the Exposure of a Tuberculosis Antigen

Schmidt, Ronny; Jacak, Jaroslaw; Schirwitz, Christopher; Stadler, Volker; Michel, Gerd; Marmé, Nicole; Schütz, Gerhard J.; Hoheisel, Jörg D.; Knemeyer, Jens-Peter
J. Proteome Res..
Jan 2011

Combinatorial Peptide Synthesis on a Microchip

Schirwitz, Christopher; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Leibe, Klaus; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Stadler, Volker; Breitling, Frank; Bischoff, F. Ralf
Current Protocols in Protein Science.
Aug 2009
Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm2 can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Particle-Based Synthesis of Peptide Arrays

Breitling, Frank; Felgenhauer, Thomas; Nesterov, Alexander; Lindenstruth, Volker; Stadler, Volker; Bischoff, F. Ralf
ChemBioChem.
Mar 2009
Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

High-density peptide arrays

Breitling, Frank; Nesterov, Alexander; Stadler, Volker; Felgenhauer, Thomas; Bischoff, F. Ralf
Mol. BioSyst..
Jan 2009
Arrays promise to advance biology by allowing parallel screening for many different binding partners. Meanwhile, lithographic methods enable combinatorial synthesis of >50 000 oligonucleotides per cm2, an advance that has revolutionized the whole field of genomics. A similar development is expected for the field of proteomics, provided that affordable, very high-density peptide arrays are available. However, peptide arrays lag behind oligonucleotide arrays. This review discusses recent developments in the field with an emphasis on methods that lead to very high-density peptide arrays.

A Novel Combinatorial Approach to High-Density Peptide Arrays

Beyer, Mario; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Schirwitz, Christopher; Leibe, Klaus; Bischoff, Ralf F.; Breitling, Frank; Stadler, Volker
Combinatorial synthesis of peptides on solid supports (1), either as spots on cellulose membranes (2) or with split-pool-libraries on polymer beads (3), substantially forwarded research in the field of peptide-protein interactions. Admittedly, these concepts have specific limitations, on one hand the number of synthesizable peptide sequences per area, on the other hand elaborate decoding/encoding strategies, false-positive results and sequence limitations. We recently established a method to produce high-density peptide arrays on microelectronic chips (4). Solid amino acid microparticles were charged by friction and transferred to defined pixel electrodes onto the chip’s surface, where they couple to a functional polymer coating simply upon melting (Fig. 16.1 A-D,F). By applying standard Fmoc chemistry according to Merrifield, peptide array densities of up to 40,000 spots per square centimetre were achieved (Fig. 16.1G). The term Merrifield synthesis describes the consecutive linear coupling and deprotecting of L-amino acids modified with base-labile fluorenylmethoxy (Fmoc) groups at the N-terminus and different acid-sensitive protecting groups at their side chains. Removing side chain protecting groups takes place only once at the very end of each synthesis and generates the natural peptide sequence thereby.

Quote form