Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Preclinical characterization of an active immunotherapy targeting calcitonin gene-related peptide

Boyd, Justin D.; Wang, Shixia; Lin, Hsiao-Wen; Hsieh, Yueh-Ting; Sun, Yu Shuang; Thibodeaux, Brett A.; Lu, Hanxin; Sahni, Jaya; Wiggins, Jonathan; Longo, Matthew S.; Brooks, Jeanne K.; Vroom, Madeline M.; Chang, Yi-Pin; Liu, Zhi; Ding, Shuang; Dodart, Jean-Cosme
Commun Med.
Apr 2025
Abstract **Background** The success of passive immunotherapies targeting Calcitonin gene-related peptide (CGRP) for managing migraine has prompted our efforts towards developing an active immunotherapy that induces the production of endogenous antibodies against CGRP. Achieving efficacious antibody titers via immunization could provide a more convenient and cost-effective treatment alternative to anti-CGRP monoclonal antibody (mAb) therapies. However, immunization against endogenous CGRP faces multiple challenges such as breaking immune tolerance, inducing sufficient antibody titers, and avoiding immune response-associated toxicity. **Methods** Synthetic peptide immunogens formulated in adjuvants were delivered intramuscularly. Serum samples were collected post immunization and used to measure antibody titers as well as for the isolation of antibodies specific to CGRP. Antibodies were characterized for their binding affinities and specificities. The capsaicin-induced increase in dermal blood flow model was used in rats for the assessment of the pharmacodynamic effect of immunization. **Results** Here we demonstrate that a peptide-based active immunotherapy designed to induce antibodies against CGRP promotes robust antibody titers across preclinical species. Characterization of the immune response strongly suggests that this peptide immunogen primarily stimulates a humoral response and only induced CGRP-specific antibodies. Antibodies produced by immunization are primarily IgG1 and demonstrate binding and activity potencies similar to marketed monoclonal antibodies against CGRP. Finally, immunization demonstrates in vivo efficacy in a rat pharmacodynamic model. **Conclusion** Our results strongly suggest that a peptide-based active immunotherapy against CGRP could provide an affordable and convenient therapeutic for the prevention of migraine.

HCV immunodominant peptide mapping reveals unique HLA-A*02-restricted signatures: insights for CD8+ T-cell-based vaccines and immunotherapies

Cardoso Corrêa-Dias, Laura; Lopes-Ribeiro, Ágata; Marques-Ferreira, Geovane; Gomes-de-Pontes, Letícia; Pereira-Santos, Thaiza Aline; De Sousa Reis, Erik Vinicius; Silva Moraes, Thaís De Fátima; Assis Martins-Filho, Olindo; Figueiredo Barbosa-Stancioli, Edel; Guimarães Da Fonseca, Flávio; Coelho-dos-Reis, Jordana Grazziela
Immunogenetics.
Jan 2025
Several barriers for the development of an HCV vaccine still exist, including the genetic diversity of the virus, and the shortage of assessable models for in vitro and in vivo assays. Therefore, in this study, HCV epitope mapping was performed for 59 polyprotein sequences from 7 HCV genotypes. Around 2,880 peptides were considered epitopes for CD8+ T cells. The peptide induction of cytokines from Th1 and/or Th2 axes of the cellular immune response was assessed, indicating a tendency for Th2 axis. In vitro evaluation was performed using peptide microarray and a recombinant HLA-A*02:01 molecule. A total of 615 peptides of high reactivity to HLA-A*02:01 were identified, with predominance of leucine and tryptophan residues, highlighting their importance for TCR-epitope binding and CD8+ T activation. Finally, HCV-derived peptide patterns restricted to HLA-A2*02:01 observed in this study provide important information for the development of a multi-epitope-based pan-genotypic vaccine against the virus.

Functional screening for anti-CMV biologics identifies a broadly neutralizing epitope of an essential envelope protein

Gardner, Thomas J.; Stein, Kathryn R.; Duty, J. Andrew; Schwarz, Toni M.; Noriega, Vanessa M.; Kraus, Thomas; Moran, Thomas M.; Tortorella, Domenico
Nat Commun.
Dec 2016
The prototypic β-herpesvirus human cytomegalovirus (CMV) establishes life-long persistence within its human host. The CMV envelope consists of various protein complexes that enable wide viral tropism. More specifically, the glycoprotein complex gH/gL/gO (gH-trimer) is required for infection of all cell types, while the gH/gL/UL128/130/131a (gH-pentamer) complex imparts specificity in infecting epithelial, endothelial and myeloid cells. Here we utilize state-of-the-art robotics and a high-throughput neutralization assay to screen and identify monoclonal antibodies (mAbs) targeting the gH glycoproteins that display broad-spectrum properties to inhibit virus infection and dissemination. Subsequent biochemical characterization reveals that the mAbs bind to gH-trimer and gH-pentamer complexes and identify the antibodies’ epitope as an ‘antigenic hot spot’ critical for virus entry. The mAbs inhibit CMV infection at a post-attachment step by interacting with a highly conserved central alpha helix-rich domain. The platform described here provides the framework for development of effective CMV biologics and vaccine design strategies.

A single amino acid substitution alter antigenicity of Glycosylated protein 4 of HP-PRRSV

Wang, Xinglong; Wang, Zhenbin; Xu, Hongyu; Biao, Xiang; Yang, Zengqi
Virol J.
Jul 2016
Background Porcine reproductive and respiratory syndrome (PRRS) is an important pig endemic disease in pork-producing countries worldwide. The etiology, porcine reproductive and respiratory syndrome virus (PRRSV), is characterized by fast antigen variability. Glycosylated protein 4 (GP4) is a minor protein in PRRSV virion, but contributes to induce protective immune responses. However, the antigenic characterization of PRRSV GP4 and the role of the mutations in this protein in PRRSV evolution are not clear. Methods Peptides chip scanning and peptide based ELISA was used to analyze the antigenic characterization of HP-PRRSV GP4. A total of 142 peptides printed on a chip were used to reveal the antigen reaction characteristics of the HP-PRRSV. The reactions of these peptides with HP-PRRSV-specific pig serum were scanned and quantified using the software PepSlide® Analyzer by fluorescence intensity. The active reaction regions (AR) were identified based on the scanning results and then the amino acids (aa) sequences of AR(s) is aligned among PRRSV strains for further identify the key aa site(s) impact the antigenicity of the protein. Peptide based ELISA is then reacted with PRRSV positive sera derived from pig inoculated with different PRRSV strains for further analysis the role of specific amino acid in AR. Results The intensity plot was used to show the reactions of the peptides with PRRSV serum and it showed that enormously different response happened to various parts of GP4. The highest reaction intensity value reached 6401.5 against one peptide with the sequence DIKTNTTAASDFVVL. An AR from S29 to G56 was identified. Sequence alignment revealed various mutations in site 43 and possibly played an important role in this AR. Peptides ELISA reaction with sera from pigs inoculated with different PRRSV strain revealed that the change of aa in site 43 reduced the reaction of the peptide with PRRSV positive sera derived from pigs inoculated with the peptide related PRRSV strains. Conclusion In this study, one AR covering S29 to G56 was identified in GP4. The aa in site 43 play an important role in determining the antigenic character of GP4. The continual mutations (S → G → D → N) occurred in this site alter the antigenicity of PRRSV GP4.

High-Density Peptide Arrays for Malaria Vaccine Development

Loeffler, Felix F.; Pfeil, Johannes; Heiss, Kirsten
The development of an efficacious and practicable vaccine conferring sterile immunity towards a Plasmodium infection represents a not yet achieved goal. A crucial factor for the impact of a given anti-plasmodial subunit vaccine is the identification of the most potent parasitic components required to induce protection from both infection and disease. Here, we present a method based on a novel high-density peptide array technology that allows for a flexible readout of malaria antibodies. Peptide arrays applied as a screening method can be used to identify novel immunogenic antibody epitopes under a large number of potential antigens/peptides. Ultimately, discovered antigen candidates and/or epitope sequences can be translated into vaccine prototype design. The technology can be further utilized to unravel antibody-mediated immune responses (e.g., involved in the establishment of semi-immunity) and moreover to confirm vaccine potency during the process of clinical development by verifying the induced antibody responses following vaccination.

HIV-1 gp140 epitope recognition is influenced by immunoglobulin DH gene segment sequence

Wang, Yuge; Kapoor, Pratibha; Parks, Robert; Silva-Sanchez, Aaron; Alam, S. Munir; Verkoczy, Laurent; Liao, Hua-Xin; Zhuang, Yingxin; Burrows, Peter; Levinson, Michael; Elgavish, Ada; Cui, Xiangqin; Haynes, Barton F.; Schroeder, Harry
Immunogenetics.
Feb 2016
Complementarity Determining Region 3 of the immunoglobulin (Ig) H chain (CDR-H3) lies at the center of the antigen-binding site where it often plays a decisive role in antigen recognition and binding. Amino acids encoded by the diversity (DH) gene segment are the main component of CDR-H3. Each DH has the potential to rearrange into one of six DH reading frames (RFs), each of which exhibits a characteristic amino acid hydrophobicity signature that has been conserved among jawed vertebrates by natural selection. A preference for use of RF1 promotes the incorporation of tyrosine into CDR-H3 while suppressing the inclusion of hydrophobic or charged amino acids. To test the hypothesis that these evolutionary constraints on DH sequence influence epitope recognition, we used mice with a single DH that has been altered to preferentially use RF2 or inverted RF1. B cells in these mice produce a CDR-H3 repertoire that is enriched for valine or arginine in place of tyrosine. We serially immunized this panel of mice with gp140 from HIV-1 JR-FL isolate and then used enzyme-linked immunosorbent assay (ELISA) or peptide microarray to assess antibody binding to key or overlapping HIV-1 envelope epitopes. By ELISA, serum reactivity to key epitopes varied by DH sequence. By microarray, sera with Ig CDR-H3s enriched for arginine bound to linear peptides with a greater range of hydrophobicity but had a lower intensity of binding than sera containing Ig CDR-H3s enriched for tyrosine or valine. We conclude that patterns of epitope recognition and binding can be heavily influenced by DH germ line sequence. This may help explain why antibodies in HIV-infected patients must undergo extensive somatic mutation in order to bind to specific viral epitopes and achieve neutralization.

Spot peptide arrays and SPR measurements: throughput and quantification in antibody selectivity studies: Peptide Arrays for Antibody Selectivity Studies

Vernet, Thierry; Choulier, Laurence; Nominé, Yves; Bellard, Laure; Baltzinger, Mireille; Travé, Gilles; Altschuh, Danièle
J. Mol. Recognit..
Oct 2015
Antibody selectivity represents a major issue in the development of efficient immuno-therapeutics and detection assays. Its description requires a comparison of the affinities of the antibody for a significant number of antigen variants. In the case of peptide antigens, this task can now be addressed to a significant level of details owing to improvements in spot peptide array technologies. They allow the high-throughput mutational analysis of peptides with, depending on assay design, an evaluation of binding stabilities. Here, we examine the cross-reactive capacity of an antibody fragment using the PEPperCHIP® technology platform (PEPperPRINT GmbH, Heidelberg, Germany; >8800 peptides per microarray) combined with the surface plasmon resonance characterization (Biacore® technology; GE-Healthcare Biacore, Uppsala, Sweden) of a subset of interactions. ScFv1F4 recognizes the N-terminal end of oncoprotein E6 of human papilloma virus 16. The spot permutation analysis (i.e. each position substituted by all amino acids except cysteine) of the wild type decapeptide (sequence 6TAMFQDPQER15) and of 15 variants thereof defined the optimal epitope and provided a ranking for variant recognition. The SPR affinity measurements mostly validated the ranking of complex stabilities deduced from array data and defined the sensitivity of spot fluorescence intensities, bringing further insight into the conditions for cross-reactivity. Our data demonstrate the importance of throughput and quantification in the assessment of antibody selectivity.

Combinatorial Peptide Synthesis on a Microchip

Schirwitz, Christopher; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Leibe, Klaus; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Stadler, Volker; Breitling, Frank; Bischoff, F. Ralf
Current Protocols in Protein Science.
Aug 2009
Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm2 can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Particle-Based Synthesis of Peptide Arrays

Breitling, Frank; Felgenhauer, Thomas; Nesterov, Alexander; Lindenstruth, Volker; Stadler, Volker; Bischoff, F. Ralf
ChemBioChem.
Mar 2009
Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

High-density peptide arrays

Breitling, Frank; Nesterov, Alexander; Stadler, Volker; Felgenhauer, Thomas; Bischoff, F. Ralf
Mol. BioSyst..
Jan 2009
Arrays promise to advance biology by allowing parallel screening for many different binding partners. Meanwhile, lithographic methods enable combinatorial synthesis of >50 000 oligonucleotides per cm2, an advance that has revolutionized the whole field of genomics. A similar development is expected for the field of proteomics, provided that affordable, very high-density peptide arrays are available. However, peptide arrays lag behind oligonucleotide arrays. This review discusses recent developments in the field with an emphasis on methods that lead to very high-density peptide arrays.

A Novel Combinatorial Approach to High-Density Peptide Arrays

Beyer, Mario; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Schirwitz, Christopher; Leibe, Klaus; Bischoff, Ralf F.; Breitling, Frank; Stadler, Volker
Combinatorial synthesis of peptides on solid supports (1), either as spots on cellulose membranes (2) or with split-pool-libraries on polymer beads (3), substantially forwarded research in the field of peptide-protein interactions. Admittedly, these concepts have specific limitations, on one hand the number of synthesizable peptide sequences per area, on the other hand elaborate decoding/encoding strategies, false-positive results and sequence limitations. We recently established a method to produce high-density peptide arrays on microelectronic chips (4). Solid amino acid microparticles were charged by friction and transferred to defined pixel electrodes onto the chip’s surface, where they couple to a functional polymer coating simply upon melting (Fig. 16.1 A-D,F). By applying standard Fmoc chemistry according to Merrifield, peptide array densities of up to 40,000 spots per square centimetre were achieved (Fig. 16.1G). The term Merrifield synthesis describes the consecutive linear coupling and deprotecting of L-amino acids modified with base-labile fluorenylmethoxy (Fmoc) groups at the N-terminus and different acid-sensitive protecting groups at their side chains. Removing side chain protecting groups takes place only once at the very end of each synthesis and generates the natural peptide sequence thereby.

Combinatorial Synthesis of Peptide Arrays with a Laser Printer

Stadler, Volker; Felgenhauer, Thomas; Beyer, Mario; Fernandez, Simon; Leibe, Klaus; Güttler, Stefan; Gröning, Martin; König, Kai; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Nesterov, Alexander; Block, Ines; Pipkorn, Rüdiger; Poustka, Annemarie; Bischoff, F. Ralf; Breitling, Frank
Angew. Chem. Int. Ed..
Sep 2008
Special delivery: The “freezing” of activated amino acid derivatives within solid particles enables a laser printer to deliver these “postal packages” to defined locations on a solid support with high resolution. Subsequent parallel coupling is initiated simply by melting a whole layer of 20 different amino acid particles (see schematic representation; Fmoc=9-fluorenylmethoxycarbonyl).

Quote form