Contact
Quote

Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Filter by
Filtered (8)
Filters
Show (8)
Cancel
Showing most recent

Preclinical characterization of an active immunotherapy targeting calcitonin gene-related peptide

Boyd, Justin D.; Wang, Shixia; Lin, Hsiao-Wen; Hsieh, Yueh-Ting; Sun, Yu Shuang; Thibodeaux, Brett A.; Lu, Hanxin; Sahni, Jaya; Wiggins, Jonathan; Longo, Matthew S.; Brooks, Jeanne K.; Vroom, Madeline M.; Chang, Yi-Pin; Liu, Zhi; Ding, Shuang; Dodart, Jean-Cosme
Commun Med.
Apr 2025
10.1038/s43856-025-00870-2
Abstract **Background** The success of passive immunotherapies targeting Calcitonin gene-related peptide (CGRP) for managing migraine has prompted our efforts towards developing an active immunotherapy that induces the production of endogenous antibodies against CGRP. Achieving efficacious antibody titers via immunization could provide a more convenient and cost-effective treatment alternative to anti-CGRP monoclonal antibody (mAb) therapies. However, immunization against endogenous CGRP faces multiple challenges such as breaking immune tolerance, inducing sufficient antibody titers, and avoiding immune response-associated toxicity. **Methods** Synthetic peptide immunogens formulated in adjuvants were delivered intramuscularly. Serum samples were collected post immunization and used to measure antibody titers as well as for the isolation of antibodies specific to CGRP. Antibodies were characterized for their binding affinities and specificities. The capsaicin-induced increase in dermal blood flow model was used in rats for the assessment of the pharmacodynamic effect of immunization. **Results** Here we demonstrate that a peptide-based active immunotherapy designed to induce antibodies against CGRP promotes robust antibody titers across preclinical species. Characterization of the immune response strongly suggests that this peptide immunogen primarily stimulates a humoral response and only induced CGRP-specific antibodies. Antibodies produced by immunization are primarily IgG1 and demonstrate binding and activity potencies similar to marketed monoclonal antibodies against CGRP. Finally, immunization demonstrates in vivo efficacy in a rat pharmacodynamic model. **Conclusion** Our results strongly suggest that a peptide-based active immunotherapy against CGRP could provide an affordable and convenient therapeutic for the prevention of migraine.

HCV immunodominant peptide mapping reveals unique HLA-A*02-restricted signatures: insights for CD8+ T-cell-based vaccines and immunotherapies

Cardoso Corrêa-Dias, Laura; Lopes-Ribeiro, Ágata; Marques-Ferreira, Geovane; Gomes-de-Pontes, Letícia; Pereira-Santos, Thaiza Aline; De Sousa Reis, Erik Vinicius; Silva Moraes, Thaís De Fátima; Assis Martins-Filho, Olindo; Figueiredo Barbosa-Stancioli, Edel; Guimarães Da Fonseca, Flávio; Coelho-dos-Reis, Jordana Grazziela
Immunogenetics.
Jan 2025
10.1007/s00251-025-01370-2
Several barriers for the development of an HCV vaccine still exist, including the genetic diversity of the virus, and the shortage of assessable models for in vitro and in vivo assays. Therefore, in this study, HCV epitope mapping was performed for 59 polyprotein sequences from 7 HCV genotypes. Around 2,880 peptides were considered epitopes for CD8+ T cells. The peptide induction of cytokines from Th1 and/or Th2 axes of the cellular immune response was assessed, indicating a tendency for Th2 axis. In vitro evaluation was performed using peptide microarray and a recombinant HLA-A*02:01 molecule. A total of 615 peptides of high reactivity to HLA-A*02:01 were identified, with predominance of leucine and tryptophan residues, highlighting their importance for TCR-epitope binding and CD8+ T activation. Finally, HCV-derived peptide patterns restricted to HLA-A2*02:01 observed in this study provide important information for the development of a multi-epitope-based pan-genotypic vaccine against the virus.

Single-Molecule Detection on a Protein-Array Assay Platform for the Exposure of a Tuberculosis Antigen

Schmidt, Ronny; Jacak, Jaroslaw; Schirwitz, Christopher; Stadler, Volker; Michel, Gerd; Marmé, Nicole; Schütz, Gerhard J.; Hoheisel, Jörg D.; Knemeyer, Jens-Peter
J. Proteome Res..
Jan 2011
10.1021/pr101070j

Combinatorial Peptide Synthesis on a Microchip

Schirwitz, Christopher; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Leibe, Klaus; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Stadler, Volker; Breitling, Frank; Bischoff, F. Ralf
Current Protocols in Protein Science.
Aug 2009
10.1002/0471140864.ps1802s57
Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm2 can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Particle-Based Synthesis of Peptide Arrays

Breitling, Frank; Felgenhauer, Thomas; Nesterov, Alexander; Lindenstruth, Volker; Stadler, Volker; Bischoff, F. Ralf
ChemBioChem.
Mar 2009
10.1002/cbic.200800735
Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

High-density peptide arrays

Breitling, Frank; Nesterov, Alexander; Stadler, Volker; Felgenhauer, Thomas; Bischoff, F. Ralf
Mol. BioSyst..
Jan 2009
10.1039/b819850k
Arrays promise to advance biology by allowing parallel screening for many different binding partners. Meanwhile, lithographic methods enable combinatorial synthesis of >50 000 oligonucleotides per cm2, an advance that has revolutionized the whole field of genomics. A similar development is expected for the field of proteomics, provided that affordable, very high-density peptide arrays are available. However, peptide arrays lag behind oligonucleotide arrays. This review discusses recent developments in the field with an emphasis on methods that lead to very high-density peptide arrays.

A Novel Combinatorial Approach to High-Density Peptide Arrays

Beyer, Mario; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Schirwitz, Christopher; Leibe, Klaus; Bischoff, Ralf F.; Breitling, Frank; Stadler, Volker
Jan 2009
10.1007/978-1-60327-394-7_16
Combinatorial synthesis of peptides on solid supports (1), either as spots on cellulose membranes (2) or with split-pool-libraries on polymer beads (3), substantially forwarded research in the field of peptide-protein interactions. Admittedly, these concepts have specific limitations, on one hand the number of synthesizable peptide sequences per area, on the other hand elaborate decoding/encoding strategies, false-positive results and sequence limitations. We recently established a method to produce high-density peptide arrays on microelectronic chips (4). Solid amino acid microparticles were charged by friction and transferred to defined pixel electrodes onto the chip’s surface, where they couple to a functional polymer coating simply upon melting (Fig. 16.1 A-D,F). By applying standard Fmoc chemistry according to Merrifield, peptide array densities of up to 40,000 spots per square centimetre were achieved (Fig. 16.1G). The term Merrifield synthesis describes the consecutive linear coupling and deprotecting of L-amino acids modified with base-labile fluorenylmethoxy (Fmoc) groups at the N-terminus and different acid-sensitive protecting groups at their side chains. Removing side chain protecting groups takes place only once at the very end of each synthesis and generates the natural peptide sequence thereby.

Combinatorial Synthesis of Peptide Arrays with a Laser Printer

Stadler, Volker; Felgenhauer, Thomas; Beyer, Mario; Fernandez, Simon; Leibe, Klaus; Güttler, Stefan; Gröning, Martin; König, Kai; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Nesterov, Alexander; Block, Ines; Pipkorn, Rüdiger; Poustka, Annemarie; Bischoff, F. Ralf; Breitling, Frank
Angew. Chem. Int. Ed..
Sep 2008
10.1002/anie.200801616
Special delivery: The “freezing” of activated amino acid derivatives within solid particles enables a laser printer to deliver these “postal packages” to defined locations on a solid support with high resolution. Subsequent parallel coupling is initiated simply by melting a whole layer of 20 different amino acid particles (see schematic representation; Fmoc=9-fluorenylmethoxycarbonyl).

Quote form