Contact
Quote

Home » Publications

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Filter by
Filtered (13)
Filters
Show (13)
Cancel
Showing most recent

Rapid response to pandemic threats: immunogenic epitope detection of pandemic pathogens for diagnostics and vaccine development using peptide microarrays

Heiss, Kirsten; Heidepriem, Jasmin; Fischer, Nico; Weber, Laura K; Dahlke, Christine; Jaenisch, Thomas; Loeffler, Felix F
J. Proteome Res..
Sep 2020
10.1021/acs.jproteome.0c00484
Emergence and re-emergence of pathogens bearing the risk of becoming a pandemic threat are on the rise. Increased travel and trade, growing population density, changes in urbanization, and climate have a critical impact on infectious disease spread. Currently, the world is confronted with the emergence of a novel coronavirus SARS-CoV-2, responsible for yet more than 500 000 deaths globally. Outbreaks caused by viruses such as SARS-CoV-2, HIV, Ebola, influenza, and Zika have increased over the last decade, underlining the urgent need for a rapid development of diagnostics and vaccines. Hence, the rational identification of biomarkers for diagnostic measures on the one hand, and antigenic targets for vaccine development on the other, are of utmost importance. Peptide microarrays can display large numbers of putative target proteins translated into overlapping linear (and cyclic) peptides. Using these highly diverse libraries, covering tens of thousands of peptides, allow for the in-depth analysis of antibody signatures in a multiplexed, high-throughput fashion. In this review, we highlight synthesis platforms that facilitate fast and highly flexible generation of high-density peptide microarrays. We further outline the multifaceted applications of these peptide array platforms for the development of serological tests and vaccines, to quickly encounter pandemic threats.

On‐Chip Neo‐Glycopeptide Synthesis for Multivalent Glycan Presentation

Mende, Marco; Tsouka, Alexandra; Heidepriem, Jasmin; Paris, Grigori; Mattes, Daniela S.; Eickelmann, Stephan; Bordoni, Vittorio; Wawrzinek, Robert; Fuchsberger, Felix F.; Seeberger, Peter H.; Rademacher, Christoph; Delbianco, Martina; Mallagaray, Alvaro; Loeffler, Felix F
Chem. Eur. J..
Apr 2020
10.1002/chem.202001291
Single glycan–protein interactions are often weak, such that glycan binding partners commonly utilize multiple, spatially defined binding sites to enhance binding avidity and specificity. Current array technologies usually neglect defined multivalent display. Laser-based array synthesis technology allows for flexible and rapid on-surface synthesis of different peptides. By combining this technique with click chemistry, neo-glycopeptides were produced directly on a functionalized glass slide in the microarray format. Density and spatial distribution of carbohydrates can be tuned, resulting in well-defined glycan structures for multivalent display. The two lectins concanavalin A and langerin were probed with different glycans on multivalent scaffolds, revealing strong spacing-, density-, and ligand-dependent binding. In addition, we could also measure the surface dissociation constant. This approach allows for a rapid generation, screening, and optimization of a multitude of multivalent scaffolds for glycan binding.

Diagnostic Profiling of the Human Public IgM Repertoire With Scalable Mimotope Libraries

Pashov, Anastas; Shivarov, Velizar; Hadzhieva, Maya; Kostov, Victor; Ferdinandov, Dilyan; Heintz, Karen-Marie; Pashova, Shina; Todorova, Milena; Vassilev, Tchavdar; Kieber-Emmons, Thomas; Meza-Zepeda, Leonardo A.; Hovig, Eivind
Front. Immunol..
Dec 2019
10.3389/fimmu.2019.02796
Specific antibody reactivities are routinely used as biomarkers, but the antibody repertoire reactivity (igome) profiles are still neglected. Here, we propose rationally designed peptide arrays as efficient probes for these system level biomarkers. Most IgM antibodies are characterized by few somatic mutations, polyspecificity, and physiological autoreactivity with housekeeping function. Previously, probing this repertoire with a set of immunodominant self-proteins provided a coarse analysis of the respective repertoire profiles. In contrast, here, we describe the generation of a peptide mimotope library that reflects the common IgM repertoire of 10,000 healthy donors. In addition, an appropriately sized subset of this quasi-complete mimotope library was further designed as a potential diagnostic tool. A 7-mer random peptide phage display library was panned on pooled human IgM. Next-generation sequencing of the selected phage yielded 224,087 sequences, which clustered in 790 sequence clusters. A set of 594 mimotopes, representative of the most significant sequence clusters, was shown to probe symmetrically the space of IgM reactivities in patients’ sera. This set of mimotopes can be easily scaled including a greater proportion of the mimotope library. The trade-off between the array size and the resolution can be explored while preserving the symmetric sampling of the mimotope sequence and reactivity spaces. BLAST search of the non-redundant protein database with the mimotopes sequences yielded significantly more immunoglobulin J region hits than random peptides, indicating a considerable idiotypic connectivity of the targeted igome. The proof of principle predictors for random diagnoses was represented by profiles of mimotopes. The number of potential reactivity profiles that can be extracted from this library is estimated at more than 1070. Thus, a quasi-complete IgM mimotope library and a scalable representative subset thereof are found to address very efficiently the dynamic diversity of the human public IgM repertoire, providing informationally dense and structurally interpretable IgM reactivity profiles.

A Low‐Cost Laser‐Based Nano‐3D Polymer Printer for Rapid Surface Patterning and Chemical Synthesis of Peptide and Glycan Microarrays

Eickelmann, Stephan; Tsouka, Alexandra; Heidepriem, Jasmin; Paris, Grigori; Zhang, Junfang; Molinari, Valerio; Mende, Marco; Loeffler, Felix F.
Adv. Mater. Technol..
Nov 2019
10.1002/admt.201900503
A low-cost laser-based printing setup is presented, which allows for the spot-wise patterning of surfaces with defined polymer nanolayers. These nanolayer spots serve as a “solid solvent,” embedding different chemicals, chemical building blocks, materials, or precursors and can be stacked on top of each other. By melting the spot pattern, the polymer-embedded molecules are released for chemical reaction. This enables researchers to quickly pattern a surface with different molecules and materials, mixing them directly on the surface for high-throughput chemical synthesis to generate and screen diverse microarray libraries. In contrast to expensive ink-jet or contact printing, this approach does not require premixing of inks, which enables in situ combinatorial mixing. Easy access and versatility of this patterning approach are shown by generating microarrays of various biomolecules, such as glycans for the first time, to screen interactions of antibodies and lectins. In addition, a layer-by-layer solid-phase synthesis of peptides directly on the microarray is presented. Amino acid–containing nanolayers are repeatedly laser-transferred and reacted with the functionalized acceptor surface in defined patterns. This simple system enables a reproducible array production, down to spot-to-spot distances of 100 µm, and offers a flexible and cheap alternative to expensive spotting robot technology.

Genomics-Driven Immunoproteomics: An Integrative Platform to Uncover Important Biomarkers for Human Diseases

Giri, Raghavendra; Qendro, Veneta; Rani, Pooja; Jepchumba, Carren; Bugos, Grace; Stadler, Volker; Han, David K.
Jul 2019
10.1007/978-1-4939-9597-4_21
Genomics-driven immunoproteomics (GDI) is a platform that helps identify antigenic protein targets of mutations and other deoxyribonucleic acid (DNA) variations that are commonly associated with pathological states. This platform utilizes data generated from deep sequencing of exomic DNA or ribonucleic acid (RNA) as input to synthesize mutant peptides into microarrays, which then can be used to detect antigenic proteins that invoke immune response in patients. The technology has been used to detect antigenic targets of multiple sclerosis, an autoimmune disease [1], and cancer to identify mutant proteins that invoke immune response in breast cancer patients [2]. This technology has many potential applications to select genomic changes that are specifically recognized by the immune system in a rapid and efficient manner.

Miniaturized and Automated Synthesis of Biomolecules—Overview and Perspectives

Mattes, Daniela S.; Jung, Nicole; Weber, Laura K.; Bräse, Stefan; Breitling, Frank
Adv. Mater..
Jun 2019
10.1002/adma.201806656
Chemical synthesis is performed by reacting different chemical building blocks with defined stoichiometry, while meeting additional conditions, such as temperature and reaction time. Such a procedure is especially suited for automation and miniaturization. Life sciences lead the way to synthesizing millions of different oligonucleotides in extremely miniaturized reaction sites, e.g., pinpointing active genes in whole genomes, while chemistry advances different types of automation. Recent progress in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) imaging could match miniaturized chemical synthesis with a powerful analytical tool to validate the outcome of many different synthesis pathways beyond applications in the life sciences. Thereby, due to the radical miniaturization of chemical synthesis, thousands of molecules can be synthesized. This in turn should allow ambitious research, e.g., finding novel synthesis routes or directly screening for photocatalysts. Herein, different technologies are discussed that might be involved in this endeavor. A special emphasis is given to the obstacles that need to be tackled when depositing tiny amounts of materials to many different extremely miniaturized reaction sites.

Automated laser-assisted synthesis of microarrays for infectious disease research

Paris, Grigori; Heidepriem, Jasmin; Tsouka, Alexandra; Mende, Marco; Eickelmann, Stephan; Loeffler, Felix F.
Mar 2019
10.1117/12.2516781
We developed a next-generation method for chemical in–situ combinatorial biomolecule array synthesis. This allows for an unprecedented combinatorial freedom in the automated chemical synthesis of molecule arrays with very high spot densities. Key feature of this new method is an automated positioning and laser transfer process: Small solid material spots are rapidly transferred from a donor film to an acceptor surface, requiring only minute amounts of materials. The transfer is performed with different and easy-to-produce donor slides. Each donor slide bears a thin polymer film, embedding one type of monomer. The coupling reaction occurs in a separate heating step, where the matrix becomes viscous and building blocks can diffuse within the material and couple to the acceptor surface. Since these transferred material spots are only several nanometers thin, this method allows for a consecutive multi-layer material deposition of e.g. activation reagents and amino acids. Subsequent heat-induced mixing facilitates an in–situ activation and coupling of the monomers. Positioning several of such resin spots, containing different chemical reagents, on top of each other, will enable for the first time in such small dimensions unique chemical synthesis strategies for each spot. Amount and concentration of the deposited materials can be adjusted with the laser parameters. Employing similar arrays, we can analyze the human immune response towards the proteome of different pathogens. We screened several peptide array replicas with different patient sera. The screenings resulted in significant hits in several proteins with interesting implications for future diagnostics and vaccine development.

Methods of Selecting Binding Reagents

Mallick, Parag; Egertson, Jarrett
Feb 2019
Methods and systems are provided herein for selecting an affinity reagent which binds a desired peptide epitope in a plurality of sequence contexts. The method relies on obtaining a peptide library, each peptide having the sequence αΧβ, wherein X is the desired peptide epitope, wherein each of a and β comprise an amino acid, using the peptide library to select an affinity reagent.

Spot peptide arrays and SPR measurements: throughput and quantification in antibody selectivity studies: Peptide Arrays for Antibody Selectivity Studies

Vernet, Thierry; Choulier, Laurence; Nominé, Yves; Bellard, Laure; Baltzinger, Mireille; Travé, Gilles; Altschuh, Danièle
J. Mol. Recognit..
Oct 2015
10.1002/jmr.2477
Antibody selectivity represents a major issue in the development of efficient immuno-therapeutics and detection assays. Its description requires a comparison of the affinities of the antibody for a significant number of antigen variants. In the case of peptide antigens, this task can now be addressed to a significant level of details owing to improvements in spot peptide array technologies. They allow the high-throughput mutational analysis of peptides with, depending on assay design, an evaluation of binding stabilities. Here, we examine the cross-reactive capacity of an antibody fragment using the PEPperCHIP® technology platform (PEPperPRINT GmbH, Heidelberg, Germany; >8800 peptides per microarray) combined with the surface plasmon resonance characterization (Biacore® technology; GE-Healthcare Biacore, Uppsala, Sweden) of a subset of interactions. ScFv1F4 recognizes the N-terminal end of oncoprotein E6 of human papilloma virus 16. The spot permutation analysis (i.e. each position substituted by all amino acids except cysteine) of the wild type decapeptide (sequence 6TAMFQDPQER15) and of 15 variants thereof defined the optimal epitope and provided a ranking for variant recognition. The SPR affinity measurements mostly validated the ranking of complex stabilities deduced from array data and defined the sensitivity of spot fluorescence intensities, bringing further insight into the conditions for cross-reactivity. Our data demonstrate the importance of throughput and quantification in the assessment of antibody selectivity.

Optimised ‘on demand’ protein arraying from DNA by cell free expression with the ‘DNA to Protein Array’ (DAPA) technology

Schmidt, Ronny; Cook, Elizabeth A.; Kastelic, Damjana; Taussig, Michael J.; Stoevesandt, Oda
Journal of Proteomics.
Aug 2013
10.1016/j.jprot.2013.02.002
We have previously described a protein arraying process based on cell free expression from DNA template arrays (DNA Array to Protein Array, DAPA). Here, we have investigated the influence of different array support coatings (Ni-NTA, Epoxy, 3D-Epoxy and Polyethylene glycol methacrylate (PEGMA)). Their optimal combination yields an increased amount of detected protein and an optimised spot morphology on the resulting protein array compared to the previously published protocol. The specificity of protein capture was improved using a tag-specific capture antibody on a protein repellent surface coating. The conditions for protein expression were optimised to yield the maximum amount of protein or the best detection results using specific monoclonal antibodies or a scaffold binder against the expressed targets. The optimised DAPA system was able to increase by threefold the expression of a representative model protein while conserving recognition by a specific antibody. The amount of expressed protein in DAPA was comparable to those of classically spotted protein arrays. Reaction conditions can be tailored to suit the application of interest. Biological significance: DAPA represents a cost effective, easy and convenient way of producing protein arrays on demand. The reported work is expected to facilitate the application of DAPA for personalized medicine and screening purposes.

Purification of High-Complexity Peptide Microarrays by Spatially Resolved Array Transfer to Gold-Coated Membranes

Schirwitz, Christopher; Loeffler, Felix F.; Felgenhauer, Thomas; Stadler, Volker; Nesterov-Mueller, Alexander; Dahint, Reiner; Breitling, Frank; Bischoff, F. Ralf
Adv. Mater..
Mar 2013
10.1002/adma.201203853
A method for the one-step purification of high-complexity peptide microarrays is presented. The entire peptide library is transferred from the synthesis support to a gold coated polyvinylidenfluoride (PVDF) membrane, whereby only full-length peptides covalently couple to the receptor membrane via an N-terminally added cysteine. Highly resolved peptide transfer and purification of up to 10 000 features per cm2 is demonstrated.

Combinatorial Synthesis of Peptide Arrays with a Laser Printer

Stadler, Volker; Felgenhauer, Thomas; Beyer, Mario; Fernandez, Simon; Leibe, Klaus; Güttler, Stefan; Gröning, Martin; König, Kai; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Nesterov, Alexander; Block, Ines; Pipkorn, Rüdiger; Poustka, Annemarie; Bischoff, F. Ralf; Breitling, Frank
Angew. Chem. Int. Ed..
Sep 2008
10.1002/anie.200801616
Special delivery: The “freezing” of activated amino acid derivatives within solid particles enables a laser printer to deliver these “postal packages” to defined locations on a solid support with high resolution. Subsequent parallel coupling is initiated simply by melting a whole layer of 20 different amino acid particles (see schematic representation; Fmoc=9-fluorenylmethoxycarbonyl).

Quote form