Contact
Quote

Home » Publications » Page 2

Publications

Discover how PEPperPRINT Peptide Microarray products have been used in different fields of research.

Filter by
Filtered (19)
Filters
Show (19)
Cancel
Showing most recent

Investigation of Immunoreactivity Profiles and Epitope Landscape in Divergent COVID-19 Trajectories and SARS-CoV-2 Variants

Bihani, Surbhi; Ray, Arka; Borishetty, Dhanush; Tuckley, Chaitanya; Salkar, Akanksha; Acharjee, Arup; Shrivastav, Prithviraj; Shrivastav, Om; Shastri, Jayanthi; Agrawal, Sachee; Duttagupta, Siddhartha; Srivastava, Sanjeeva
J. Proteome Res..
Jan 2025
10.1021/acs.jproteome.4c00791
This study aimed to elucidate the complexity of the humoral immune response in COVID-19 patients with varying disease trajectories using a SARS-CoV-2 whole proteome peptide microarray chip. The microarray, containing 5347 peptides spanning the entire SARS-CoV-2 proteome and key variants of concern, was used to analyze IgG responses in 10 severe-to-recovered, 9 nonsevere-to-severe cases, and 10 control case (5 pre-pandemic and 5 SARS-CoV-2-negative) plasma samples. We identified 1151 IgG-reactive peptides corresponding to 647 epitopes, with 207 peptides being cross-reactive across 124 epitopes. Nonstructural protein 3 (nsp3) exhibited the highest number of total and unique epitopes, followed by the spike protein. nsp12 had the most number of cross-reactive epitopes. Peptides from the spike protein and nsps 2, 3, 5, and 13 were notably associated with recovery. Additionally, specific mutations in SARS-CoV-2 variants were found to alter peptide immunoreactivity, with some mutations (e.g., G142D, L452R, and N501Y) enhancing and others (e.g., R190S and E484 K) reducing immune recognition. These findings have critical implications for the development of diagnostics, vaccines, and therapeutics. Understanding the distribution of epitopes and the impact of viral mutations on antigenicity provides insights into immune evasion mechanisms, informing strategies for controlling COVID-19 and future coronavirus outbreaks.

High-throughput identification of immunoreactive peptides and corresponding proteins from Anaplasma platys and Ehrlichia canis using peptide microarray chips

Llanes, Alejandro; Madesh, Swetha; Brangulis, Kalvis; Rajeev, Sreekumari
Front Cell Infect Microbiol.
Jan 2025
10.3389/fcimb.2025.1671309
INTRODUCTION: Anaplasma platys and Ehrlichia canis are rickettsial pathogens infecting dogs, with a worldwide distribution. Both species are obligate intracellular pathogens and colonize bone marrow-derived cells, with coinfections frequently reported in dogs. Although E. canis immunodominant proteins have been thoroughly characterized, very few high-throughput studies have been conducted to identify immunogenic proteins from Anaplasma spp. In this study, we used a methodology based on peptide microarray chips to identify immunoreactive peptides, either shared or species-specific, in the complete theoretical proteomes of both pathogens. METHODS: B-cell epitopes were predicted in the corresponding proteins from both species and ranked for synthesis on the peptide microarrays. These microarrays were screened with serum samples from antibody-positive dogs, as well as negative control sera from unexposed dogs. Additionally, we assessed the feasibility of integrating evidence gathered at the level of individual peptides to identify potentially immunogenic proteins contributing to the patterns of immunoreactivity observed on microarrays. RESULTS: Screening of peptide microarrays resulted in complex antibody reactivity patterns against thousands of peptides. After discarding peptides with cross-reactivity to negative control sera, we identified over 1,200 immunoreactive peptides, including ~80 peptides shared between the two species with almost identical sequences. Despite screening linear peptides, we were able to identify proteins previously reported as immunodominant in E. canis, some of which contain predominantly conformational epitopes. DISCUSSION: Our results suggest that a high-throughput strategy based on peptide microarrays is an effective approach for the rapid identification of immunoreactive peptides and the underlying immunogenic proteins. This study provides a foundation for developing novel diagnostic tools and vaccine candidates against A. platys and E. canis, including potential combined or multivalent formulations targeting both pathogens.

Combinatorial Peptide Synthesis on a Microchip

Schirwitz, Christopher; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Leibe, Klaus; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Stadler, Volker; Breitling, Frank; Bischoff, F. Ralf
Current Protocols in Protein Science.
Aug 2009
10.1002/0471140864.ps1802s57
Microchips are used in the combinatorial synthesis of peptide arrays by means of amino acid microparticle deposition. The surface of custom-built microchips can be equipped with an amino-modified poly(ethylene glycol)methacrylate (PEGMA) graft polymer coating, which permits high loading of functional groups and resists nonspecific protein adsorption. Specific microparticles that are addressed to the polymer-coated microchip surface in a well defined pattern release preactivated amino acids upon melting, and thus allow combinatorial synthesis of high-complexity peptide arrays directly on the chip surface. Currently, arrays with densities of up to 40,000 peptide spots/cm2 can be generated in this way, with a minimum of coupling cycles required for full combinatorial synthesis. Without using any additional blocking agent, specific peptide recognition has been verified by background-free immunostaining on the chip-based array. This unit describes microchip surface modification, combinatorial peptide array synthesis on the chip, and a typical immunoassay employing the resulting high-density peptide arrays.

Particle-Based Synthesis of Peptide Arrays

Breitling, Frank; Felgenhauer, Thomas; Nesterov, Alexander; Lindenstruth, Volker; Stadler, Volker; Bischoff, F. Ralf
ChemBioChem.
Mar 2009
10.1002/cbic.200800735
Lithographic methods allow for the combinatorial synthesis of >50,000 oligonucleotides per cm(2), and this has revolutionized the field of genomics. High-density peptide arrays promise to advance the field of proteomics in a similar way, but currently lag behind. This is mainly due to the monomer-by-monomer repeated consecutive coupling of 20 different amino acids associated with lithography, which adds up to an excessive number of coupling cycles. Combinatorial synthesis based on electrically charged solid amino acid particles resolves this problem. A color laser printer or a chip addresses the different charged particles consecutively to a solid support, where, when completed, the whole layer of solid amino acid particles is melted at once. This frees hitherto immobilized amino acids to couple all 20 different amino acids to the support in one single coupling reaction. The method should allow for the translation of entire genomes into sets of overlapping peptides to be used in proteome research.

High-density peptide arrays

Breitling, Frank; Nesterov, Alexander; Stadler, Volker; Felgenhauer, Thomas; Bischoff, F. Ralf
Mol. BioSyst..
Jan 2009
10.1039/b819850k
Arrays promise to advance biology by allowing parallel screening for many different binding partners. Meanwhile, lithographic methods enable combinatorial synthesis of >50 000 oligonucleotides per cm2, an advance that has revolutionized the whole field of genomics. A similar development is expected for the field of proteomics, provided that affordable, very high-density peptide arrays are available. However, peptide arrays lag behind oligonucleotide arrays. This review discusses recent developments in the field with an emphasis on methods that lead to very high-density peptide arrays.

A Novel Combinatorial Approach to High-Density Peptide Arrays

Beyer, Mario; Block, Ines; König, Kai; Nesterov, Alexander; Fernandez, Simon; Felgenhauer, Thomas; Schirwitz, Christopher; Leibe, Klaus; Bischoff, Ralf F.; Breitling, Frank; Stadler, Volker
Jan 2009
10.1007/978-1-60327-394-7_16
Combinatorial synthesis of peptides on solid supports (1), either as spots on cellulose membranes (2) or with split-pool-libraries on polymer beads (3), substantially forwarded research in the field of peptide-protein interactions. Admittedly, these concepts have specific limitations, on one hand the number of synthesizable peptide sequences per area, on the other hand elaborate decoding/encoding strategies, false-positive results and sequence limitations. We recently established a method to produce high-density peptide arrays on microelectronic chips (4). Solid amino acid microparticles were charged by friction and transferred to defined pixel electrodes onto the chip’s surface, where they couple to a functional polymer coating simply upon melting (Fig. 16.1 A-D,F). By applying standard Fmoc chemistry according to Merrifield, peptide array densities of up to 40,000 spots per square centimetre were achieved (Fig. 16.1G). The term Merrifield synthesis describes the consecutive linear coupling and deprotecting of L-amino acids modified with base-labile fluorenylmethoxy (Fmoc) groups at the N-terminus and different acid-sensitive protecting groups at their side chains. Removing side chain protecting groups takes place only once at the very end of each synthesis and generates the natural peptide sequence thereby.

Combinatorial Synthesis of Peptide Arrays with a Laser Printer

Stadler, Volker; Felgenhauer, Thomas; Beyer, Mario; Fernandez, Simon; Leibe, Klaus; Güttler, Stefan; Gröning, Martin; König, Kai; Torralba, Gloria; Hausmann, Michael; Lindenstruth, Volker; Nesterov, Alexander; Block, Ines; Pipkorn, Rüdiger; Poustka, Annemarie; Bischoff, F. Ralf; Breitling, Frank
Angew. Chem. Int. Ed..
Sep 2008
10.1002/anie.200801616
Special delivery: The “freezing” of activated amino acid derivatives within solid particles enables a laser printer to deliver these “postal packages” to defined locations on a solid support with high resolution. Subsequent parallel coupling is initiated simply by melting a whole layer of 20 different amino acid particles (see schematic representation; Fmoc=9-fluorenylmethoxycarbonyl).

Quote form